SN74ALVCH162344DLR Datasheets | Logic - Buffers, Drivers, Receivers, Transceivers Address Driver 4 Element 2:8 Bit per Element 3-State Output 56-SSOP
By apogeeweb,
SN74ALVCH162344DLR, SN74ALVCH162344DLR Datasheet,SN74ALVCH162344DLR PDF,Texas Instruments
Descriptions
IC ADDRESS DRIVER 3.6V 56SSOP:Digi-Key Marketplace
IC ADDRESS DVR 1-4BIT 56SSOP:Digi-Key
This 1-bit to 4-bit address driver is designed for 1.65-V to 3.6-V VCC operation. The SN74ALVCH162344 is used in applications in which four separate memory locations must be addressed by a single address. The outputs, which are designed to sink up to 12 mA, include equivalent 26- resistors to reduce overshoot and undershoot. To ensure the high-impedance state during power up or power down, the output-enable (OE)\ inputs should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.:Texas Instruments