SN74ALS569ANSRE4 Datasheets | Logic - Counters, Dividers Counter IC Binary Counter 1 Element 4 Bit Positive Edge 20-SO
By apogeeweb,
SN74ALS569ANSRE4, SN74ALS569ANSRE4 Datasheet,SN74ALS569ANSRE4 PDF,Texas Instruments
Descriptions
Logic - Counters Sync 4-Bit Up/Down Bnry Cntr W/3St Otp:Mouser
IC COUNTER SYNCH 4BIT U/D 20SO:Digi-Key
The SN74ALS568A decade counter and ´ALS569A binary counters are programmable, count up or down, and offer both synchronous and asynchronous clearing. All synchronous functions are executed on the positive-going edge of the clock (CLK) input. The clear function is initiated by applying a low level to either asynchronous clear (ACLR\) or synchronous clear (SCLR\). Asynchronous (direct) clearing overrides all other functions of the device, while synchronous clearing overrides only the other synchronous functions. Data is loaded from the A, B, C, and D inputs by holding load () low during a positive-going clock transition. The counting function is enabled only when enable P (ENP\) and enable T (ENT\) are low and ACLR\, SCLR\, and are high. The up/down (U/D\) input controls the direction of the count. These counters count up when U/D\ is high and count down when U/D\ is low. A high level at the output-enable () input forces the Q outputs into the high-impedance state, and a low level enables those outputs. Counting is independent of . ENT\ is fed forward to enable the ripple-carry output (RCO\) to produce a low-level pulse while the count is zero (all Q outputs low) when counting down or maximum (9 or 15) when counting up. The clocked carry output (CCO\) produces a low-level pulse for a duration equal to that of the low level of the clock when is low and the counter is enabled (both ENP\ and ENT\ are low); otherwise, CCO\ is high. CCO\ does not have the glitches commonly associated with a ripple-carry output. Cascading is normally accomplished by connecting or CCO\ of the first counter to ENT\ of the next counter. However, for very high-speed counting, should be used for cascading since CCO\ does not become active until the clock returns to the low level. The SN54ALS569A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ALS568A and SN74ALS569A are characterized for operation from 0°C to 70°C.:Texas Instruments
You May Also Be Interested In
-
- 74HC4059D,112
- IC PROG DIV-BY-N COUNTER 24-SOIC
-
call
Detail
-
- 74HC4020N,652
- IC 14STAGE BINARY RIPPLE 16-DIP
-
call
Detail
-
- 74HC191N,652
- IC COUNTER UP/DOWN SYNC 16DIP
-
call
Detail
-
- 74HC161N,652
- IC SYNC 4BIT BINARY COUNT 16DIP
-
call
Detail
-
- 8410001CA
- Dual 4-Bit Binary Counters 14-CDIP -55 to 125
-
call
Detail
-
- 74LVC169BQ,115
- IC SYNC 4BIT BIN COUNT 16DHVQFN
-
call
Detail
-
- 74HCT4017N,652
- IC JOHNSON DECADE COUNTER 16-DIP
-
call
Detail
-
- 74HCT161D,652
- IC SYNC 4BIT BINARY COUNT 16SOIC
-
call
Detail
-
- 74HCT93D,118
- IC 4BIT BIN RIPPLE COUNT 14SOIC
-
call
Detail
-
- 74HC4060BQ,115
- IC BINARY COUNTER 14STG 16DHVQFN
-
call
Detail
-
- HEC4060BT,112
- IC 14STAGE BINARY COUNTER 16SOIC
-
call
Detail
-
- SN74HC193PWR
- IC COUNTER 4BIT SYNC U/D 16TSSOP
-
call
Detail
-
- 74HCT160D,653
- IC SYNC BCD DECADE COUNT 16SOIC
-
call
Detail
-
- SN74LV4040APWR
- IC 12-BIT ASYNC BIN CNTR16-TSSOP
-
call
Detail
-
- SN74LS163AN
- IC SYNC 4-BIT BIN CNTR 16-DIP
-
call
Detail