SN74AHC367DBRG4 Datasheets | Logic - Buffers, Drivers, Receivers, Transceivers Buffer, Non-Inverting 2 Element 2, 4 (Hex) Bit per Element 3-State Output 16-SSOP
By apogeeweb,
SN74AHC367DBRG4, SN74AHC367DBRG4 Datasheet,SN74AHC367DBRG4 PDF,Texas Instruments
Descriptions
IC BUFF/DVR TRI-ST HEX 16SSOP:Heisener Electronics
The AHC367 devices are hex buffers and line drivers designed for 2-V to 5.5-V VCC operation. These devices are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The AHC367 devices are organized as dual 4-line and 2-line buffers/drivers with active-low output-enable (1OE\ and 2OE\) inputs. When OE\ is low, the device passes noninverted data from the A inputs to the Y outputs. When OE\ is high, the utputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.:Texas Instruments