HAFUHH0200L4AXT Datasheets | Flow Sensors HONEYWELL ZEPHYR AIRFLOW SENSOR

Flow Sensor Mass Air/Gas ±0.5% 0SLPM to 200SLPMFlow Range 60psiOperating Pressure 6-Pin Box:Verical
SENSOR, AIRFLOW, 200SLPM, 60PSI, 22MM TA; SENSOR, AIRFLOW, 200SLPM, 60PSI, 22MM TAPERED; Pressure Max:60psi; Supply Voltage DC Min:3V; Supply Voltage DC Max:10V; Accuracy %:0.5%; Flow Rate Min:-; Flow Rate Max:200l/min; Port Style:Tapered:element14 APAC
Honeywell Zephyr™ HAF Series sensors provide a digital interface for reading airflow over specified full-scale flow and compensated temperature ranges. The thermally isolated heater and temperature sensing elements help these sensors provide a fast response to air or gas flow. Zephyr sensors are designed to measure mass flow of air and other non-corrosive gases. Standard flow ranges are 20 SLPM or 200 SLPM, with custom flow ranges available. The sensors are fully calibrated and temperature compensated with an onboard Application Specific Integrated Circuit (ASIC). The HAF Series >20 SLPM is compensated over the calibrated temperature range of 0 °C to 50 °C [32 °F to 122 °F]. The state-of-the-art ASIC-based compensation provides digital (I2C) outputs with a response time of 1 ms. These sensors operate on the heat transfer principle to measure mass airflow. They consist of a microbridge Microelectronic and Microelectromechanical System (MEMS) with temperature-sensitive resistors deposited with thin films of platinum and silicon nitride. The MEMS sensing die is located in a precise and carefully designed airflow channel to provide repeatable response to flow. Zephyr sensors provide the customer with enhanced reliability, high accuracy, repeatable measurements and the ability to customize sensor options to meet many specific application needs. The combination of rugged housings with a stable substrate makes these products extremely robust. They are designed and manufactured according to ISO 9001 standards.:Honeywell