Home Data Acquisition - Digital to Analog Converters (DAC)AD5372BSTZ Datasheets | Data Acquisition - Digital to Analog Converters (DAC) IC DAC 16BIT V-OUT 64LQFP
DAC 32-CH Resistor-String 16-bit 64-Pin LQFP Tray:Chip One Stop Global Digital To Analog Converter Dac, 16 Bit, 540Ksps, Lqfp-64:Newark The AD5372/AD5373 contain 32, 16-bit or 14-bit digital-to-analog converters (DACs) in a single 64-lead LQFP. The devices provide buffered voltage outputs with a nominal span of 4× the reference voltage. The gain and offset of each DAC can be inde-pendently trimmed to remove errors. For even greater flexibility, the device is divided into four groups of eight DACs. Two offset DACs allow the output range of the groups to be altered. Group 0 can be adjusted by Offset DAC 0, and Group 1 to Group 3 can be adjusted by Offset DAC 1. The AD5372/AD5373 offer guaranteed operation over a wide supply range: VSS from −16.5 V to −4.5 V and VDD from 9 V to 16.5 V. The output amplifier headroom requirement is 1.4 V operating with a load current of 1 mA. The ADAD5372/AD5373 have a high-speed serial inter- face, which is compatible with SPI, QSPI™, MICROWIRE™, and DSP interface standards and can handle clock speeds of up to 50 MHz. The DAC registers are updated on reception of new data. All the outputs can be updated simultaneously by taking the LDAC input low. Each channel has a programmable gain and an offset adjust register. Each DAC output is gained and buffered on-chip with respect to an external SIGGNDx input. The DAC outputs can also be switched to SIGGNDx via the CLR pin. Applications Level setting in automatic test equipment (ATE) Variable optical attenuators (VOA) Optical switches Industrial control systems Instrumentation:Analog Devices
FEATURES
If your digital signals need to be converted into analog then this AD5372BSTZ DAC converter from Analog Devices will easily accomplish that that. It has a voltage output. This device is based on Resistor-String architecture. This device's digital interface is serial (spi, qspi, microwire). This DAC has a resolution of 16bit. Its typical dual supply voltage is ±9/-5|±12/-5|±15/-5 V, with a minimum of -4.5/9 V and maximum of ±16.5 V. This DAC has a temperature range of -40 °C to 85 °C. This component comes in tray packaging, useful for fast picking and placing of your parts. This device uses dual power supplies.
DAC 32-CH Resistor-String 16-bit 64-Pin LQFP Tray:Chip One Stop Global Digital To Analog Converter Dac, 16 Bit, 540Ksps, Lqfp-64:Newark The AD5372/AD5373 contain 32, 16-bit or 14-bit digital-to-analog converters (DACs) in a single 64-lead LQFP. The devices provide buffered voltage outputs with a nominal span of 4× the reference voltage. The gain and offset of each DAC can be inde-pendently trimmed to remove errors. For even greater flexibility, the device is divided into four groups of eight DACs. Two offset DACs allow the output range of the groups to be altered. Group 0 can be adjusted by Offset DAC 0, and Group 1 to Group 3 can be adjusted by Offset DAC 1. The AD5372/AD5373 offer guaranteed operation over a wide supply range: VSS from −16.5 V to −4.5 V and VDD from 9 V to 16.5 V. The output amplifier headroom requirement is 1.4 V operating with a load current of 1 mA. The ADAD5372/AD5373 have a high-speed serial inter- face, which is compatible with SPI, QSPI™, MICROWIRE™, and DSP interface standards and can handle clock speeds of up to 50 MHz. The DAC registers are updated on reception of new data. All the outputs can be updated simultaneously by taking the LDAC input low. Each channel has a programmable gain and an offset adjust register. Each DAC output is gained and buffered on-chip with respect to an external SIGGNDx input. The DAC outputs can also be switched to SIGGNDx via the CLR pin. Applications Level setting in automatic test equipment (ATE) Variable optical attenuators (VOA) Optical switches Industrial control systems Instrumentation:Analog Devices
On Order
1:$73.820
AD5372BSTZ
Analog Devices Inc
32-Channel, 16-Bit, Serial Input, Voltage-Output DAC
For in stock parts, orders generally can be ready to ship within 4 hours.
Apogeeweb ships orders once a day at about 5pm except Sunday.
Once shipped, estimated delivery time depends on the below carriers you chose.
Shipping rates
Shipping rates for your order can be found in the shopping cart.
Shipping option
We provide DHL, FedEx, Ups, Singpost international shipping.
Shipping tracking
We will notify you by email with tracking number once order is shipped.
You can also find the tracking number in order history.
Returning/warranty
Returning
Returns are normally accepted when completed within 365 days from date of shipment, please contact customer service for a return authorization.
Parts should be unused and in original packaging.
Customer has to take charge for the shipping.
Warranty
All Apogeeweb purchases come with a 90-day Apogeeweb warranty against any manufacturing defects.
If the customer complains the product is "renovation/fake/having quality problem", and ask for a change or refund, the related procedures can be carried out only after an effective test report from a authoritative third party was provided.
Ordering
How to Buy
Apogeeweb accepts online orders.
Add to cart > Login> Check out > Submit order > Complete payment >Delivery
Payment
PayPal, Credit Card, Wire Transfer and Western Union
DAC 32-CH Resistor-String 16-bit 64-Pin LQFP Tray:Chip One Stop Global Digital To Analog Converter Dac, 16 Bit, 540Ksps, Lqfp-64:Newark The AD5372/AD5373 contain 32, 16-bit or 14-bit digital-to-analog converters (DACs) in a single 64-lead LQFP. The devices provide buffered voltage outputs with a nominal span of 4× the reference voltage. The gain and offset of each DAC can be inde-pendently trimmed to remove errors. For even greater flexibility, the device is divided into four groups of eight DACs. Two offset DACs allow the output range of the groups to be altered. Group 0 can be adjusted by Offset DAC 0, and Group 1 to Group 3 can be adjusted by Offset DAC 1. The AD5372/AD5373 offer guaranteed operation over a wide supply range: VSS from −16.5 V to −4.5 V and VDD from 9 V to 16.5 V. The output amplifier headroom requirement is 1.4 V operating with a load current of 1 mA. The ADAD5372/AD5373 have a high-speed serial inter- face, which is compatible with SPI, QSPI™, MICROWIRE™, and DSP interface standards and can handle clock speeds of up to 50 MHz. The DAC registers are updated on reception of new data. All the outputs can be updated simultaneously by taking the LDAC input low. Each channel has a programmable gain and an offset adjust register. Each DAC output is gained and buffered on-chip with respect to an external SIGGNDx input. The DAC outputs can also be switched to SIGGNDx via the CLR pin. Applications Level setting in automatic test equipment (ATE) Variable optical attenuators (VOA) Optical switches Industrial control systems Instrumentation:Analog Devices
FEATURES
If your digital signals need to be converted into analog then this AD5372BSTZ DAC converter from Analog Devices will easily accomplish that that. It has a voltage output. This device is based on Resistor-String architecture. This device's digital interface is serial (spi, qspi, microwire). This DAC has a resolution of 16bit. Its typical dual supply voltage is ±9/-5|±12/-5|±15/-5 V, with a minimum of -4.5/9 V and maximum of ±16.5 V. This DAC has a temperature range of -40 °C to 85 °C. This component comes in tray packaging, useful for fast picking and placing of your parts. This device uses dual power supplies.