Home Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps5962-88565022A Datasheets | Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps IC OPAMP GP 4 CIRCUIT 20CLCC
QPL or Military Specs are for reference only． Parts are not for military use． See Terms and Conditions．
Alternative Models
Texas Instruments
81023062A
priceUSD 15.490
Operating Supply Current-
Max Supply Voltage18 V
Common Mode Rejection Ratio80 dB
Power Supply Rejection Ratio (PSRR)-
Input Offset Voltage (Vos)9 mV
Gain Bandwidth Product3 MHz
Slew Rate13 V/µs
Number of Pins20
Case/PackageLCC
Authorized Distributors4
Analog Devices
AD829SE/883B
priceUSD 141.380
Operating Supply Current6.5 mA
Max Supply Voltage18 V
Common Mode Rejection Ratio120 dB
Power Supply Rejection Ratio (PSRR)120 dB
Input Offset Voltage (Vos)1 mV
Gain Bandwidth Product300 MHz
Slew Rate230 V/µs
Number of Pins20
Case/PackageLCC
Authorized Distributors3
Analog Devices
AD841SE/883B
priceUSD 86.900
Operating Supply Current-
Max Supply Voltage18 V
Common Mode Rejection Ratio100 dB
Power Supply Rejection Ratio (PSRR)100 dB
Input Offset Voltage (Vos)500 µV
Gain Bandwidth Product40 MHz
Slew Rate300 V/µs
Number of Pins20
Case/PackageLCC
Authorized Distributors3
Analog Devices
AD842SE/883B
priceUSD 135.085
Operating Supply Current-
Max Supply Voltage18 V
Common Mode Rejection Ratio115 dB
Power Supply Rejection Ratio (PSRR)100 dB
Input Offset Voltage (Vos)300 µV
Gain Bandwidth Product80 MHz
Slew Rate375 V/µs
Number of Pins20
Case/PackageLCC
Authorized Distributors4
Texas Instruments
TL074MFKB
priceUSD 21.065
Operating Supply Current-
Max Supply Voltage18 V
Common Mode Rejection Ratio80 dB
Power Supply Rejection Ratio (PSRR)-
Input Offset Voltage (Vos)9 mV
Gain Bandwidth Product3 MHz
Slew Rate13 V/µs
Number of Pins20
Case/PackageLCC
Authorized Distributors3
Descriptions
Op Amp Quad Low Noise Amplifier ±18V 20-Pin CLLCC Tube:Arrow.cn IC OPAMP GP 4 CIRCUIT 20CLCC:Digi-Key vpe: 50/tube/lcc:ACDS The OP471 is a monolithic quad op amp featuring low-noise, 11nV/(root)Hz Max at 1kHz, excellent speed, 8V/µs typical, a gain-bandwidth of 6.5MHz, and unity-gain stability. The OP471 has an input offset voltage under 0.8mV and an input offset voltage drift below 4µV/°C. guaranteed over the full military temperature range. Open loop gain of the OP471 is over 500,000 into a 10k Ohm load insuring outstanding gain accuracy and linearity. The input bias current is under 25nA limiting errors due to signal source resistance. The OP471's CMR of over 105dB and PSRR of under 5.6µV/V significantly reduce errors caused by ground noise and power supply fluctuations. The OP471 offers excellent amplifier matching which is important for applications such as multiple gain blocks, low-noise instrumentation amplifiers, quad buffers and low-noise active filters. The OP471 conforms to the industry standard 14-pin DIP pinout. It is pin compatible with the OP-11, LM 148/149, HA4741, RM4156, MC33074, TL084 and TL074 quad op amps and can be used to upgrade systems using these devices. For applications requiring even lower voltage noise the OP470, with a voltage density of 5nV/(root)Hz Max at 1kHz, is recommended.:Analog Devices
FEATURES
Easily produce a large amount of gain in your electronic circuit by using this general purpose amplifier 5962-88565022A from Analog Devices in a cascaded fashion. Its maximum power dissipation is 800 mW. Its typical dual supply voltage is ±15 V, with a maximum of ±18 V. This op amp has a temperature range of -55 °C to 125 °C. It has 4 channels per chip. This device utilizes bipolar technology. This device uses dual power supplies.
For in stock parts, orders generally can be ready to ship within 4 hours.
Apogeeweb ships orders once a day at about 5pm except Sunday.
Once shipped, estimated delivery time depends on the below carriers you chose.
Shipping rates
Shipping rates for your order can be found in the shopping cart.
Shipping option
We provide DHL, FedEx, Ups, Singpost international shipping.
Shipping tracking
We will notify you by email with tracking number once order is shipped.
You can also find the tracking number in order history.
Returning/warranty
Returning
Returns are normally accepted when completed within 365 days from date of shipment, please contact customer service for a return authorization.
Parts should be unused and in original packaging.
Customer has to take charge for the shipping.
Warranty
All Apogeeweb purchases come with a 90-day Apogeeweb warranty against any manufacturing defects.
If the customer complains the product is "renovation/fake/having quality problem", and ask for a change or refund, the related procedures can be carried out only after an effective test report from a authoritative third party was provided.
Ordering
How to Buy
Apogeeweb accepts online orders.
Add to cart > Login> Check out > Submit order > Complete payment >Delivery
Payment
PayPal, Credit Card, Wire Transfer and Western Union
QPL or Military Specs are for reference only． Parts are not for military use． See Terms and Conditions．
Op Amp Quad Low Noise Amplifier ±18V 20-Pin CLLCC Tube:Arrow.cn IC OPAMP GP 4 CIRCUIT 20CLCC:Digi-Key vpe: 50/tube/lcc:ACDS The OP471 is a monolithic quad op amp featuring low-noise, 11nV/(root)Hz Max at 1kHz, excellent speed, 8V/µs typical, a gain-bandwidth of 6.5MHz, and unity-gain stability. The OP471 has an input offset voltage under 0.8mV and an input offset voltage drift below 4µV/°C. guaranteed over the full military temperature range. Open loop gain of the OP471 is over 500,000 into a 10k Ohm load insuring outstanding gain accuracy and linearity. The input bias current is under 25nA limiting errors due to signal source resistance. The OP471's CMR of over 105dB and PSRR of under 5.6µV/V significantly reduce errors caused by ground noise and power supply fluctuations. The OP471 offers excellent amplifier matching which is important for applications such as multiple gain blocks, low-noise instrumentation amplifiers, quad buffers and low-noise active filters. The OP471 conforms to the industry standard 14-pin DIP pinout. It is pin compatible with the OP-11, LM 148/149, HA4741, RM4156, MC33074, TL084 and TL074 quad op amps and can be used to upgrade systems using these devices. For applications requiring even lower voltage noise the OP470, with a voltage density of 5nV/(root)Hz Max at 1kHz, is recommended.:Analog Devices
FEATURES
Easily produce a large amount of gain in your electronic circuit by using this general purpose amplifier 5962-88565022A from Analog Devices in a cascaded fashion. Its maximum power dissipation is 800 mW. Its typical dual supply voltage is ±15 V, with a maximum of ±18 V. This op amp has a temperature range of -55 °C to 125 °C. It has 4 channels per chip. This device utilizes bipolar technology. This device uses dual power supplies.
There is no relevant information available for this part yet.
0 comment
