The VND600SP-E is a monolithic 2-channel high side Solid State Relay intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes. Built-in thermal shutdown and outputs current limitation protect the chip from over temperature and short circuit. Device turns-off in case of ground pin disconnections.
Do your circuit specifications require switching between low and high currents and voltages? STMicroelectronics" high side VND600SPTR-E power switch is your solution. This charge controller has 2 outputs. This device has a maximum power dissipation of 96100 mW. It features 0.03(Max) Ohm switch on resistance. This device has a supply current of 6(Max) mA and a minimum output current of 25 A. Its maximum power dissipation is 96100 mW. This component will be shipped in tape and reel packaging to allow for effective mounting and safe delivery. This charge controller has a minimum operating temperature of -40 °C and a maximum of 150 °C.
Power Switch/Driver 1:1 N-Channel 25A 10-PowerSO