The SN74HC541N is an Octal Buffer and Line Driver with 3-state outputs. This octal buffer and line driver features the performance of the HC240 device and a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly facilitates printed circuit board layout. The 3-state outputs are controlled by a two-input NOR gate. If either output-enable (OE1\ or OE2\\) input is high, all eight outputs are in the high-impedance state. The HC541 device provides true data at the outputs.
Amplify analog and digital signals by driving the input to the transmission line with this SN74HC541NSR buffer and line driver from Texas Instruments. With a 3-state output, this is power management at its best. This line driver has a minimum operating temperature of -40 °C and a maximum of 85 °C. In order to ensure safe delivery and enable quick mounting of this component after delivery, it will be encased in tape and reel packaging during shipment. It has 8 channels per chip. This non-inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 2 V, while its maximum is 6 V.
The SN74HC541DWR is an octal Buffer/Line Driver with 3-state outputs. It features the performance of the HC240 devices and a pin-out with inputs and outputs. This arrangement greatly facilitates printed circuit board layout. The 3-state outputs are controlled by a two-input NOR gate. If either output-enable (OE1\ or OE2\\) input is high, all eight outputs are in the high-impedance state. The HC541 device provides true data at the outputs.