Home  QS3861QG8  QS3861QG8 VS SN74CBTLV3861DGVR

QS3861QG8 vs SN74CBTLV3861DGVR vs SN74CBTLV3861DWR Comparison

  • Hide Shared Attributes
    QS3861QG8
    QS3861QG8
    SN74CBTLV3861DGVR
    SN74CBTLV3861DGVR
    SN74CBTLV3861DWR
    SN74CBTLV3861DWR
  • Part No.
    QS3861QG8
    SN74CBTLV3861DGVR
    SN74CBTLV3861DWR
  • Description
    Bus Switch 1Element CMOS 10IN 24Pin QSOP T/R
    Bus Switch 1Element CMOS 10IN 24Pin TVSOP T/R
    TEXAS INSTRUMENTS SN74CBTLV3861DWR Bus Switch, 10Channels, 64mA, 2.3V to 3.6V, SOIC-24
  • Manufacturer
    Integrated device technology
    N/A
    N/A
  • Classification
    Logic ICs
    Logic ICs
    Logic ICs
  • Reference Price(USD)
    $0.494
    $0.159
    $0.181
  • Inventory(pcs)
    3k
    10k
    4.2k
  • Case/Package
    QSOP-24
    TVSOP-24
    SOIC-24
  • Number of Pins
    24
    24
    24
  • Number of Bits
    10
    10
    10
  • Number of Channels
    10
    -
    10
  • Bandwidth
    -
    200 MHz
    200 MHz
  • Power Dissipation
    0.5 W
    -
    -
  • Propagation Delay Max (tpd)
    -
    250 ps
    250 ps
  • Number of Positions
    24
    -
    -
  • Input Voltage (DC)
    -
    1.70 V
    -
  • Polarity
    -
    Non-Inverting
    Non-Inverting
  • Voltage Nodes
    -
    3.30 V, 2.50 V
    3.30 V, 2.50 V
  • ECCN Code
    -
    -
    EAR99
  • Supply Voltage (DC)
    -
    2.30V ~ 3.60V
    2.30V ~ 3.60V
  • Supply Current
    -
    250 mA
    250 mA
  • Output Current
    -
    64.0 mA
    64 mA
  • Operating Temperature
    -40℃ ~ 85℃
    -40℃ ~ 85℃
    -40℃ ~ 85℃
  • Contacts Type
    -
    SPST
    SPST
  • Size-Length
    8.7 mm
    5 mm
    -
  • Size-Width
    3.8 mm
    4.4 mm
    -
  • Size-Height
    1.47 mm
    1.05 mm
    -
  • Size-Thickness
    1.47 mm
    -
    -
  • Mounting Style
    Surface Mount
    Surface Mount
    Surface Mount
  • Packaging
    Tape & Reel (TR)
    Tape & Reel (TR)
    Tape & Reel (TR)
  • Lead-Free Status
    Lead Free
    Lead Free
    Lead Free
  • RoHS
    RoHS Compliant
    RoHS Compliant
    RoHS Compliant
  • Product Lifecycle Status
    Active
    Active
    Active
  • Supply Voltage (Min)
    4.75 V
    2.3 V
    2.3 V
  • Supply Voltage (Max)
    5.25 V
    3.6 V
    3.6 V
  • Operating Temperature (Max)
    85 ℃
    85 ℃
    85 ℃
  • Operating Temperature (Min)
    40 ℃
    -40 ℃
    -40 ℃
  • Supply Voltage
    4.75V ~ 5.25V
    2.3V ~ 3.6V
    2.3V ~ 3.6V
  • REACH SVHC Compliance Edition
    -
    -
    2015/06/15
  • Overview
    View all
    SN74CBTLV3861DGVR Product overview

    The SN74CBTLV3861 provides ten bits of high-speed bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The device is organized as one 10-bit bus switch. When output enable (OE\\\\) is low, the 10-bit bus switch is on, and port A is connected to port B. When OE\ is high, the switch is open, and the high-impedance state exists between the two ports. This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

    View all
    SN74CBTLV3861DWR Product overview

    The SN74CBTLV3861 provides ten bits of high-speed bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The device is organized as one 10-bit bus switch. When output enable (OE\\\\) is low, the 10-bit bus switch is on, and port A is connected to port B. When OE\ is high, the switch is open, and the high-impedance state exists between the two ports. This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

    View all

QS3861QG8 Alternative Parts

Image Part Compare Manufacturer Category Description
Image:QS3861QG8 Mfr.Part#:QS3861QG8 Compare: Current Part Manufacturers:Integrated device technology Category:Logic ICs Description:Bus switch 1element cmos 10in 24pin qsop t/r
Image:QS3861QG8 Mfr.Part#:QS3861QG8 Compare: QS3861QG8 VS QS3861QG8 Manufacturers:Integrated device technology Category:Logic ICs Description:Bus switch 1element cmos 10in 24pin qsop t/r
Image:SN74CBTLV3861DGVR Mfr.Part#:SN74CBTLV3861DGVR Compare: QS3861QG8 VS SN74CBTLV3861DGVR Manufacturers:N/A Category:Logic ICs Description:Bus switch 1element cmos 10in 24pin tvsop t/r
Image:SN74CBTLV3861DWR Mfr.Part#:SN74CBTLV3861DWR Compare: QS3861QG8 VS SN74CBTLV3861DWR Manufacturers:N/A Category:Logic ICs Description:N/a sn74cbtlv3861dwr bus switch, 10channels, 64ma, 2.3v to 3.6v, soic-24