DESCRIPTION The PTN78000A is a series of high-efficiency, buck-boost integrated switching regulators (ISR), that represent the third generation in the evolution of the PT78NR100 series of products. In new designs, it should be considered in place of the PT78NR100 series of single in-line pin (SIP) products. The PTN78000A is smaller and lighter than its predecessor, and has either similar or improved electrical performance characteristics. The caseless, double-sided package also exhibits improved thermal characteristics, and is compatible with TI"s roadmap for RoHS and lead-free compliance. FEATURES • 1.5-A Output Current • Wide-Input Voltage(7 V to 29 V) • Wide-Output Voltage Adjust(–15 V to –3 V) • High Efficiency (Up to 84%) • Output Current Limit • Overtemperature Shutdown • Operating Temperature: –40°C to 85°C • Surface-Mount Package Available APPLICATIONS • General-Purpose, Industrial Controls, HVAC Systems, Test and Measurement, Medical Instrumentation, AC/DC Adaptors, Vehicles, Marine, and Avionics
Provide the ability to switch between voltages by using this step down PTN78000WAZT DC to DC converter and switching regulator module. It has a voltage of 2.5 to 12.6 V. This part has a temperature range of -40 °C to 85 °C. In order to guarantee safe delivery and allow for quick mounting of this component after delivery, it will be enclosed in tape and reel packaging during shipment.
The PTN78000AAZ is a 9W surface-mount non-isolated adjustable buck-boost Switching Regulator with wide negative output. The PTN78000A is a series of high-efficiency integrated switching regulators (ISR), that represent the third generation in the evolution of the PT78NR100 series of products. In new designs, it should be considered in place of the PT78NR100 series of single in-line pin (SIP) products. The PTN78000A is smaller and lighter than its predecessor and has either similar or improved electrical performance characteristics. Operating from a wide-input voltage range, the PTN78000A provides high-efficiency, positive-to-negative voltage conversion for loads of up to 1.5A. The output voltage is set using a single external resistor and may be set to any value within the range, -15 to -3V. The PTN78000A has under-voltage lockout and is suited to a wide variety of general-purpose applications that operate off 12, 24 or tightly regulated 28VDC power.