The PIC16C715-20I/SO is a PIC16 family 8-bit powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS one-time programmable (OTP) based Microcontroller packs powerful PIC®(RISC) architecture. This product offer all of the advantages of the well recognized mid-range x14 architecture with standardized features including 3.5kB of addressable program memory size, 128bytes of data memory size, 13 general-purpose I/O pins and 4-channel 8-bit analog-to-digital (A/D) converter. This device operates at a maximum frequency of 20MHz with wide operating voltage of 2.5 to 5.5V.
GENERAL DESCRIPTION The PIC16C71X is a family of low-cost, high-performance, CMOS, fully-static, 8-bit microcontrollers with integrated analog-to-digital (A/D) converters, in the PIC16CXX mid-range family. Devices included in this data sheet: • PIC16C710 • PIC16C71 • PIC16C711 • PIC16C715 PIC16C71X Microcontroller Core Features: • High-performance RISC CPU • Only 35 single word instructions to learn • All single cycle instructions except for program branches which are two cycle • Operating speed: DC - 20 MHz clock input DC - 200 ns instruction cycle • Up to 2K x 14 words of Program Memory, up to 128 x 8 bytes of Data Memory (RAM) • Interrupt capability • Eight level deep hardware stack • Direct, indirect, and relative addressing modes • Power-on Reset (POR) • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) • Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation • Programmable code-protection • Power saving SLEEP mode • Selectable oscillator options • Low-power, high-speed CMOS EPROM technology • Fully static design • Wide operating voltage range: 2.5V to 6.0V • High Sink/Source Current 25/25 mA • Commercial, Industrial and Extended temperature ranges • Program Memory Parity Error Checking Circuitry with Parity Error Reset (PER) (PIC16C715) • Low-power consumption: - < 2 mA @ 5V, 4 MHz - 15 µA typical @ 3V, 32 kHz - < 1 µA typical standby current PIC16C71X Peripheral Features: • Timer0: 8-bit timer/counter with 8-bit prescaler • 8-bit multichannel analog-to-digital converter • Brown-out detection circuitry for Brown-out Reset (BOR) • 13 I/O Pins with Individual Direction Control