The OP467GSZ is a high speed precision quad Operational Amplifier offers the performance of a high speed op-amp combined with the advantages of a precision op-amp. The OP467 is an ideal choice for applications where, traditionally, more than one op-amp was used to achieve this level of speed and precision. The internal compensation of the OP467 ensures stable unity-gain operation and it can drive large capacitive loads without oscillation. With a gain bandwidth product of 28MHz driving a 30pF load, output slew rate is 170V/µs and settling time to 0.01% in less than 200ns, the OP467 provides excellent dynamic accuracy in high speed data acquisition systems. The channel-to-channel separation is typically 60dB at 10MHz. The DC performance of the OP467 includes less than 0.5mV of offset, a voltage noise density below 6nV/√Hz and a total supply current under 10mA. The common-mode rejection ratio (CMRR) is typically 85dB. The power supply rejection ratio (PSRR) is typically 107dB.
Product Details The OP471 is a monolithic quad op amp featuring low-noise, 11nV/(root)Hz Max at 1kHz, excellent speed, 8V/µs typical, a gain-bandwidth of 6.5MHz, and unity-gain stability. The OP471 has an input offset voltage under 0.8mV and an input offset voltage drift below 4µV/°C. guaranteed over the full military temperature range. Open loop gain of the OP471 is over 500,000 into a 10k Ohm load insuring outstanding gain accuracy and linearity. The input bias current is under 25nA limiting errors due to signal source resistance. The OP471"s CMR of over 105dB and PSRR of under 5.6µV/V significantly reduce errors caused by ground noise and power supply fluctuations. The OP471 offers excellent amplifier matching which is important for applications such as multiple gain blocks, low-noise instrumentation amplifiers, quad buffers and low-noise active filters. The OP471 conforms to the industry standard 14-pin DIP pinout. It is pin compatible with the OP-11, LM 148/149, HA4741, RM4156, MC33074, TL084 and TL074 quad op amps and can be used to upgrade systems using these devices. For applications requiring even lower voltage noise the OP470, with a voltage density of 5nV/(root)Hz Max at 1kHz, is recommended. ### Features and Benefits
description The TLE214x and TLE214xA devices are high-performance, internally compensated operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE214xA is a tighter offset voltage grade of the TLE214x. Both are pin-compatible upgrades to standard industry products. Low Noise 10 Hz . . . 15 nV/√Hz 1 kHz . . . 10.5 nV/√Hz 10000-pF Load Capability 20-mA Min Short-Circuit Output Current 27-V/µs Min Slew Rate High Gain-Bandwidth Product. . . 5.9 MHz Low VIO . . . 500 µV Max at 25°C Single or Split Supply...4 V to 44 V Fast Settling Time 340 ns to 0.1% 400 ns to 0.01% Saturation Recovery. . . 150 ns Large Output Swing VCC−+0.1 V to VCC+− 1 V