Analog Devices Audio Amplifiers Bipolar/JFET Audio Dual 1mV 2nA
Manufacturer
Adi
Adi
Adi
Classification
Amplifiers,Buffers
Amplifiers,Buffers
Amplifiers,Buffers
Reference Price(USD)
$1.833
$1.238
$3.957
Inventory（pcs）
0
3.1k
0
Case/Package
SOIC-8
SOIC-8
SOIC-8
Number of Pins
8
8
8
Number of Channels
2
2
2
Bandwidth
-
9 MHz
-
Slew Rate
22.0 V/μs
22.0 V/μs
22.0 V/μs
Number of Circuits
2
2
2
Number of Positions
-
8
-
Input Offset Voltage
1 mV
1 mV
1 mV
HK STC License
-
-
NLR
Supply Current
30 mA
30 mA
30 mA
Input Bias Current
100 nA
100 nA
100 nA
Operating Temperature
-40℃ ~ 85℃
-40℃ ~ 85℃
-40℃ ~ 85℃
Mil-Spec
No
No
No
Gain Bandwidth Product
9 MHz
9 MHz
9 MHz
Common Mode Rejection Ratio
80 dB
80 dB
80 dB
Size-Length
5 mm
5 mm
-
Size-Width
4 mm
4 mm
4 mm
Size-Height
1.5 mm
1.5 mm
-
Mounting Style
Surface Mount
Surface Mount
Surface Mount
Packaging
Tape & Reel (TR)
Tape & Reel (TR)
Tube
Lead-Free Status
Contains Lead
Lead Free
Contains Lead
RoHS
Non-Compliant
RoHS Compliant
Non-Compliant
Product Lifecycle Status
Active
Active
Active
Gain Bandwidth
9 MHz
9 MHz
9 MHz
Minimum CMRR Range
80 dB
80 dB
80 dB
Operating Temperature (Max)
85 ℃
85 ℃
85 ℃
Supply Voltage (Max)
-
22 V
22 V
Operating Temperature (Min)
40 ℃
-40 ℃
-40 ℃
Supply Voltage (Min)
-
4.5 V
4.5 V
Overview
OP275GS-REEL Product overview
Product Details
The OP275 is the first amplifier to feature the Butler Amplifier front-end. This new front-end design combines both bipolar and JFET transistors to attain amplifiers with the accuracy and low noise performance of bipolar transistors, and the speed and sound quality of JFET"s. Total Harmonic Distortion plus Noise equals that of previous audio amplifiers, but at much lower supply currents.
A very low l/f corner of below 6 Hz maintains a flat noise density response. Whether noise is measured at either 30 Hz or 1kHz, it is only 6 nV/(root)Hz. The JFET portion of the input stage gives the OP275 its high slew rates to keep distortion low, even when large output swings are required, and the 22 V/µs slew rate of the OP275 is the fastest of any standard audio amplifier. Best of all, this low noise and high speed are accomplished using less than 5mA of supply current, lower than any standard audio amplifier.
Improved dc performance is also provided with bias and offset currents greatly reduced over purely bipolar designs. Input offset voltage is guaranteed at 1mV and is typically less than 200µV. This allows the OP275 to be used in many dc coupled or summing applications without the need for special selections or the added noise of additional offset adjustment circuitry.
The output os capable of driving 600 Ohm loads to 10 V rms while maintaining low distortion. THD + Noise at 3 V rms is a low 0.0006%.
The OP275 is specified over the extended industrial (-40°C to +85°C) temperature range. OP275s are availale in both plastic DIP and SOIC-8 packages. SOIC-8 packages are available in 2500 piece reels. Many audio amplifiers are not offered in SOIC-8 surface mount packages for a variety of reasons; however, the OP275 was designed so that it would offer full performance in surface mount packaging.
### Features and Benefits
.
Excellent Sonic Characteristics
.
Low Noise: 6 nV/√Hz
.
Low Distortion: 0.0006%
.
High Slew Rate: 22 V/µs
.
Wide Bandwidth: 9 MHz
.
Low Supply Current: 5 mA
.
Low Offset Voltage: 1 mV
.
Low Offset Current: 2 nA
.
Unity Gain Stable
.
SOIC-8 Package
.
PDIP-8 Package
View all
OP275GSZ-REEL7 Product overview
Product Details
The OP275 is the first amplifier to feature the Butler Amplifier front-end. This new front-end design combines both bipolar and JFET transistors to attain amplifiers with the accuracy and low noise performance of bipolar transistors, and the speed and sound quality of JFET"s. Total Harmonic Distortion plus Noise equals that of previous audio amplifiers, but at much lower supply currents.
A very low l/f corner of below 6 Hz maintains a flat noise density response. Whether noise is measured at either 30 Hz or 1kHz, it is only 6 nV/(root)Hz. The JFET portion of the input stage gives the OP275 its high slew rates to keep distortion low, even when large output swings are required, and the 22 V/µs slew rate of the OP275 is the fastest of any standard audio amplifier. Best of all, this low noise and high speed are accomplished using less than 5mA of supply current, lower than any standard audio amplifier.
Improved dc performance is also provided with bias and offset currents greatly reduced over purely bipolar designs. Input offset voltage is guaranteed at 1mV and is typically less than 200µV. This allows the OP275 to be used in many dc coupled or summing applications without the need for special selections or the added noise of additional offset adjustment circuitry.
The output os capable of driving 600 Ohm loads to 10 V rms while maintaining low distortion. THD + Noise at 3 V rms is a low 0.0006%.
The OP275 is specified over the extended industrial (-40°C to +85°C) temperature range. OP275s are availale in both plastic DIP and SOIC-8 packages. SOIC-8 packages are available in 2500 piece reels. Many audio amplifiers are not offered in SOIC-8 surface mount packages for a variety of reasons; however, the OP275 was designed so that it would offer full performance in surface mount packaging.
### Features and Benefits
.
Excellent Sonic Characteristics
.
Low Noise: 6 nV/√Hz
.
Low Distortion: 0.0006%
.
High Slew Rate: 22 V/µs
.
Wide Bandwidth: 9 MHz
.
Low Supply Current: 5 mA
.
Low Offset Voltage: 1 mV
.
Low Offset Current: 2 nA
.
Unity Gain Stable
.
SOIC-8 Package
.
PDIP-8 Package
View all
OP275GS Product overview
Product Details
The OP275 is the first amplifier to feature the Butler Amplifier front-end. This new front-end design combines both bipolar and JFET transistors to attain amplifiers with the accuracy and low noise performance of bipolar transistors, and the speed and sound quality of JFET"s. Total Harmonic Distortion plus Noise equals that of previous audio amplifiers, but at much lower supply currents.
A very low l/f corner of below 6 Hz maintains a flat noise density response. Whether noise is measured at either 30 Hz or 1kHz, it is only 6 nV/(root)Hz. The JFET portion of the input stage gives the OP275 its high slew rates to keep distortion low, even when large output swings are required, and the 22 V/µs slew rate of the OP275 is the fastest of any standard audio amplifier. Best of all, this low noise and high speed are accomplished using less than 5mA of supply current, lower than any standard audio amplifier.
Improved dc performance is also provided with bias and offset currents greatly reduced over purely bipolar designs. Input offset voltage is guaranteed at 1mV and is typically less than 200µV. This allows the OP275 to be used in many dc coupled or summing applications without the need for special selections or the added noise of additional offset adjustment circuitry.
The output os capable of driving 600 Ohm loads to 10 V rms while maintaining low distortion. THD + Noise at 3 V rms is a low 0.0006%.
The OP275 is specified over the extended industrial (-40°C to +85°C) temperature range. OP275s are availale in both plastic DIP and SOIC-8 packages. SOIC-8 packages are available in 2500 piece reels. Many audio amplifiers are not offered in SOIC-8 surface mount packages for a variety of reasons; however, the OP275 was designed so that it would offer full performance in surface mount packaging.
### Features and Benefits
Op amp, 4.25mhz, 4v/us, bandwidth:4.25mhz, no. of amplifiers:1, slew rate:4v/ s, supply voltage range: 1.5v to 18v, operaN/Ang temperature min:-40 c, operaN/Ang temperature max:125 c
OP275GS-REEL 
