We are Apogeeweb Semiconductor Electronic

WELCOME TO OUR BLOG

Home  OP275GP  OP275GP VS LF353P

OP275GP vs OPA2132PA vs TLE2082ACP Comparison

  • OP275GP
    OP275GP
    OPA2132PA
    OPA2132PA
    TLE2082ACP
    TLE2082ACP
  • Part No.
    OP275GP
    OPA2132PA
    TLE2082ACP
  • Description
    OP Amp Dual GP 22V 8Pin PDIP
    Operational Amplifier, Dual, 2 Amplifier, 8MHz, 20V/µs, ± 2.5V to ± 18V, DIP, 8Pins
    TEXAS INSTRUMENTS TLE2082ACP Operational Amplifier, Dual, 2 Amplifier, 9.4MHz, 35V/µs, ± 2.25V to ± 19V, DIP, 8Pins
  • Manufacturer
    ADI
    TI
    TI
  • Classification
    Operational Amplifiers(General Purpose)
    Operational Amplifiers(General Purpose)
    Operational Amplifiers(General Purpose)
  • Reference Price(USD)
    $1.823
    $2.800
    $0.873
  • Inventory(pcs)
    0
    3.3k
    7.3k
  • Case/Package
    PDIP-8
    PDIP-8
    PDIP-8
  • Number of Pins
    8
    8
    8
  • Number of Channels
    2
    2
    2
  • Bandwidth
    -
    8 MHz
    9.4 MHz
  • Slew Rate
    22.0 V/μs
    20.0 V/μs
    40.0 V/μs
  • Power Dissipation
    -
    -
    1 W
  • Number of Positions
    -
    8
    8
  • Number of Circuits
    2
    2
    2
  • Operating Voltage
    -
    2.5V ~ 18V
    -
  • Input Offset Voltage
    1 mV
    500 µV
    700 µV
  • Supply Voltage (DC)
    -
    15.0 V
    -
  • HK STC License
    NLR
    -
    -
  • Supply Current
    -
    4 mA
    3.1 mA
  • Input Bias Current
    350 nA
    5 pA
    20 pA
  • Output Current
    -
    -
    ≤80 mA
  • Input Offset Drift
    -
    2.00 µV/K
    2.40 µV/K
  • Operating Temperature
    -40℃ ~ 85℃
    -40℃ ~ 85℃
    0℃ ~ 70℃
  • Common Mode Rejection Ratio
    80 dB
    86 dB
    70 dB
  • Gain Bandwidth Product
    9 MHz
    8 MHz
    9.4 MHz
  • Size-Length
    -
    9.81 mm
    9.81 mm
  • Size-Width
    -
    6.35 mm
    6.35 mm
  • Size-Height
    -
    4.57 mm
    4.57 mm
  • Mounting Style
    Through Hole
    Through Hole
    Through Hole
  • Packaging
    Tube
    Tube
    Tube
  • REACH SVHC Compliance
    -
    No SVHC
    -
  • Lead-Free Status
    Lead Free
    Lead Free
    Lead Free
  • RoHS
    Non-Compliant
    RoHS Compliant
    RoHS Compliant
  • Product Lifecycle Status
    Unknown
    Active
    Active
  • Operating Temperature (Max)
    85 ℃
    125 ℃
    70 ℃
  • Power Dissipation (Max)
    -
    -
    1000 mW
  • Operating Temperature (Min)
    -40 ℃
    -40 ℃
    0 ℃
  • Minimum CMRR Range
    80 dB
    86 dB
    70 dB
  • Gain Bandwidth
    -
    8 MHz
    10 MHz
  • REACH SVHC Compliance Edition
    -
    2015/06/15
    2015/06/15
  • Overview
    View all
    OPA2132PA Product overview

    The OPA2132PA is a high speed, FET input, dual operational amplifier in 8 pin DIP package. It provides high speed and excellent DC performance. The combination of high slew rate and wide bandwidth provides fast settling time. Input cascade circuitry provides excellent common mode rejection and maintains low input bias current over its wide input voltage range. The OPA2132PA is stable in unity gain and provides excellent dynamic behaviour over wide range of load conditions including high load capacitance. The device has completely independent circuitry for lowest crosstalk and freedom from interaction even when overdriven or overloaded.

    .
    Gain bandwidth product of 8MHz
    .
    HIGH slew rate of 20V/µs
    .
    Input bias current of 50pA
    .
    Low input voltage noise of 8nV/Hz at f = 1KHz
    .
    Low distortion of 0.00008%
    .
    Open loop voltage gain of 120dB at RL = 600 ohm
    .
    Operating voltage range from ±2.5V to ±18V
    .
    Input offset voltage of ±0.5mV
    .
    Common mode rejection ratio (CMRR) of 94dB
    .
    Operating temperature range from -40°C to 85°C
    This integrated circuit can be damaged by ESD. Failure to observe proper handling and installation procedures can cause damage.
    View all
    TLE2082ACP Product overview

    **description** The TLE208x series of JFET-input operational amplifiers more than double the bandwidth and triple the slew rate of the TL07x and TL08x families of BiFET operational amplifiers. The TLE208x also have wider supply-voltage rails, increasing the dynamic-signal range for BiFET circuits to ±19 V. On-chip zener trimming of offset voltage yields precision grades for greater accuracy in dc-coupled applications. The TLE208x are pin-compatible with lower performance BiFET operational amplifiers for ease in improving performance in existing designs. BiFET operational amplifiers offer the inherently higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar amplifiers. This makes these amplifiers better suited for interfacing with high-impedance sensors or very low level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.

    .
    *Direct Upgrades to TL05x, TL07x, and  ****TL08x BiFET Operational Amplifiers**
    .
    *Greater Than 2**× **Bandwidth (10 MHz) and ****3**× **Slew Rate (45 V/**µ**s) Than TL08x**
    .
    *On-Chip Offset Voltage Trimming for ****Improved DC Performance**
    .
    *Wider Supply Rails Increase Dynamic ****Signal Range to **±**19 V**
    View all

OP275GP Alternative Parts

Image Part Compare Manufacturer Category Description
Image:OP275GP Mfr.Part#:OP275GP Compare: Current Part Manufacturers:ADI Category:Operational Amplifiers(General Purpose) Description:OP Amp Dual GP 22V 8Pin PDIP
Image:LF353P Mfr.Part#:LF353P Compare: OP275GP VS LF353P Manufacturers:TI Category:Operational Amplifiers(General Purpose) Description:Operational Amplifier, Dual, 2 Amplifier, 3MHz, 13V/µs, ± 3.5V to ± 18V, DIP, 8Pins
Image:OPA2132PA Mfr.Part#:OPA2132PA Compare: OP275GP VS OPA2132PA Manufacturers:TI Category:Operational Amplifiers(General Purpose) Description:Operational Amplifier, Dual, 2 Amplifier, 8MHz, 20V/µs, ± 2.5V to ± 18V, DIP, 8Pins
Image:TLE2082CP Mfr.Part#:TLE2082CP Compare: OP275GP VS TLE2082CP Manufacturers:TI Category:Operational Amplifiers(General Purpose) Description:TEXAS INSTRUMENTS TLE2082CP Operational Amplifier, Dual, 2 Amplifier, 9.4MHz, 35V/µs, ± 2.25V to ± 19V, DIP, 8Pins