MCB4357UME vs OM13040,598 Comparison

The MCB4357UME is a Starter Kit with ULINK-ME for evaluating LPC4357, a 32-bit ARM Cortex-M4/ARM Cortex-M0 microcontroller.

.

136kB On-chip SRAM

.

1MB Dual bank on-chip flash

.

16MB NOR flash, 4MB quad-SPI flash, 16MB SDRAM and 16KB EEPROM (I2C) - on-board memory

.

Colour QVGA TFT LCD with touchscreen

.

10/100 Ethernet port

.

High-speed USB 2.0 Host/Device/OTG interface

.

Full-speed USB 2.0 Host/Device interface

.

CAN interfaces

.

Serial/UART Port

.

MicroSD card interface

.

4 User push-buttons + reset

.

Digital temperature sensor (I2C)

.

Analogue voltage control for ACD input

.

Audio CODEC with line-in/out and microphone/headphone connector + speaker

.

20-pin JTAG (0.1") debug interface connector debug interface connector

.

10-pin Cortex debug (0.05 inch) debug interface connector

.

20-pin Cortex debug + ETM trace (0.05 inch connector) debug interface connector

OM13040,598 is a Keil MCB4357 evaluation board which enables to create and test working programs based on the LPC4300 family of dual core ARM Cortex-M4/M0 devices. The MCB4357 evaluation board includes the MDK-ARM Lite edition tools. These tools help user to get started writing programs and testing the microcontroller and its capabilities. Sample applications that run on the MCB4357 evaluation board, and a quickstart guide are included. Populated with LPC4357 ARM Cortex-M4 based digital signal controller with an ARM Cortex-M0 coprocessor designed for embedded applications requiring signal processing.

.

204MHz LPC4357 device with ARM Cortex-M4 processor and Cortex-M0 coprocessor (LBGA256)

.

Colour QVGA TFT LCD with touchscreen

.

10/100 Ethernet port

.

High speed USB 2.0 Host/Device/OTG interface (USB host + Micro USB Device/OTG connectors)

.

Full speed USB 2.0 Host/Device interface (USB host + micro USB Device connectors)

.

CAN interfaces, microSD card interface

.

Serial/UART port, digital temperature sensor (I2C)

.

Audio CODEC with line in/out and microphone/headphone connector & speaker

.

Analog voltage control for ACD input

.

Debug interface connectors