NX3L1G3157GM,115 vs TS5A3159DCKR vs NX3L1G3157GW,125 Comparison

Overview The NX3L1G3157 is a low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer. It has a digital select input (S), two independent inputs/outputs (Y0 and Y1) and a common input/output (Z). Schmitt trigger action at the digital input makes the circuit tolerant to slower input rise and fall times. The NX3L1G3157 allows signals with amplitude up to VCC to be transmitted from Z to Y0 or Y1; or from Y0 or Y1 to Z. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals. MoreLess ## Features

.

Wide supply voltage range from 1.4 V to 4.3 V

.

Very low ON resistance:

.

1.6 Ω (typical) at VCC = 1.4 V

.

1.0 Ω (typical) at VCC = 1.65 V

.

0.55 Ω (typical) at VCC = 2.3 V

.

0.50 Ω (typical) at VCC = 2.7 V

.

0.50 Ω (typical) at VCC = 4.3 V

.

Break-before-make switching

.

High noise immunity

.

ESD protection:

.

HBM JESD22-A114F Class 3A exceeds 7500 V

.

MM JESD22-A115-A exceeds 200 V

.

CDM AEC-Q100-011 revision B exceeds 1000 V

.

IEC61000-4-2 contact discharge exceeds 8000 V for switch ports

.

CMOS low-power consumption

.

Latch-up performance exceeds 100 mA per JESD78 Class II Level A

.

Direct interface with TTL levels at 3.0 V

.

Control input accepts voltages above supply voltage

.

High current handling capability (350 mA continuous current under 3.3 V supply)

.

Specified from -40 °C to +85 °C and from -40 °C to +125 °C

.

Cell phone

.

PDA

.

Portable media player

The TS5A3159DCKR is a 1R SPDT Analogue Switch designed to operate from 1.65 to 5.5V. The device offers low on-state resistance and excellent ON-state resistance matching with the break-before-make feature, to prevent signal distortion during the transferring of a signal from one channel to another. The 1.65 to 5.5V operation allows compatibility with more logic levels and the bidirectional I/Os can pass analogue signals from 0V to V+ with low distortion. The low ON-state resistance, ON-state resistance matching and charge injection make this switch an excellent choice for analogue signals that require minimal distortion. The device has an excellent total harmonic distortion (THD) performance and consumes very low power. These features make this device suitable for portable audio applications.

.

Isolation in powered-down mode, V+ = 0

.

Low ON-state resistance (1R)

.

Control inputs are 5.5V tolerant

.

Low charge injection

.

Excellent ON-state resistance matching

.

Low total harmonic distortion (THD)

.

Single-supply operation

.

Latch-up performance exceeds 100mA per JESD 78, class II

.

Green product and no Sb/Br

Overview The NX3L1G3157 is a low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer. It has a digital select input (S), two independent inputs/outputs (Y0 and Y1) and a common input/output (Z). Schmitt trigger action at the digital input makes the circuit tolerant to slower input rise and fall times. The NX3L1G3157 allows signals with amplitude up to VCC to be transmitted from Z to Y0 or Y1; or from Y0 or Y1 to Z. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals. MoreLess ## Features

.

Wide supply voltage range from 1.4 V to 4.3 V

.

Very low ON resistance:

.

1.6 Ω (typical) at VCC = 1.4 V

.

1.0 Ω (typical) at VCC = 1.65 V

.

0.55 Ω (typical) at VCC = 2.3 V

.

0.50 Ω (typical) at VCC = 2.7 V

.

0.50 Ω (typical) at VCC = 4.3 V

.

Break-before-make switching

.

High noise immunity

.

ESD protection:

.

HBM JESD22-A114F Class 3A exceeds 7500 V

.

MM JESD22-A115-A exceeds 200 V

.

CDM AEC-Q100-011 revision B exceeds 1000 V

.

IEC61000-4-2 contact discharge exceeds 8000 V for switch ports

.

CMOS low-power consumption

.

Latch-up performance exceeds 100 mA per JESD78 Class II Level A

.

Direct interface with TTL levels at 3.0 V

.

Control input accepts voltages above supply voltage

.

High current handling capability (350 mA continuous current under 3.3 V supply)

.

Specified from -40 °C to +85 °C and from -40 °C to +125 °C

.

Cell phone

.

PDA

.

Portable media player