MX29LV800CBXBI-70G vs MX29LV800CBXGI-70G vs MX29LV800CBXEI-70G Comparison

The MX29LV160C T/B product family has been discontinued. The MX29LV160C T/B product family is not recommended for new designs. The MX29LV160D T/B family is the recommended replacement. Please refer to MX29LV160D T/B datasheet for full specifications and ordering information, or contact your local sales representative for additional support FEATURES GENERAL FEATURES • Byte/Word mode switchable:    - 524,288 x8 / 262,144 x16 (MX29LV400C)    - 1,048,576 x8 / 524,288 x16 (MX29LV800C)    - 2,097,152 x8 / 1,048,576 x16 (MX29LV160C) • Sector Structure    - 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x 1 64K-Byte x 7 (MX29LV400C), 64K-Byte x 15 (MX29LV800C), 64K-Byte x 31 (MX29LV160C)    - Provides sector protect function to prevent program or erase operation in the protected sector    - Provides chip unprotect function to allow code changing    - Provides temporary sector unprotect function for code changing in previously protected sector • Single Power Supply Operation    - 2.7 to 3.6 volt for read, erase, and program operations • Latch-up protected to 250mA from -1V to Vcc + 1V • Low Vcc write inhibit : Vcc ≤ 1.4V • Compatible with JEDEC standard    - Pinout and software compatible to single power supply Flash • Functional compatible with MX29LV400B/MX29LV800B/MX29LV160B device PERFORMANCE • High Performance    - Fast access time: 45R (MX29LV400C and MX29LV800C only), 55R/70/90ns    - Fast program time: 7us/word typical utilizing accelerate function    - Fast erase time: 0.7s/sector, 15s/chip (typical, MX29LV160C) • Low Power Consumption    - Low active read current: 10mA (typical) at 5MHz    - Low standby current: 200nA (typical) • Minimum 100,000 erase/program cycle • 20 years data retention SOFTWARE FEATURES • Erase Suspend/ Erase Resume    - Suspends sector erase operation to read data from or program data to another sector which is not being erased • Status Reply    - Data# Polling & Toggle bits provide detection of program and erase operation completion • Support Common Flash Interface (CFI) HARDWARE FEATURES • Ready/Busy# (RY/BY#) Output    - Provides a hardware method of detecting program and erase operation completion • Hardware Reset (RESET#) Input    - Provides a hardware method to reset the internal state machine to read mode PACKAGE • 44-Pin SOP • 48-Pin TSOP • 48-Ball TFBGA • 48-Ball LFBGA • 48-Ball WFBGA • 48-Ball XFLGA • All devices are RoHS Compliant

The MX29LV160C T/B product family has been discontinued. The MX29LV160C T/B product family is not recommended for new designs. The MX29LV160D T/B family is the recommended replacement. Please refer to MX29LV160D T/B datasheet for full specifications and ordering information, or contact your local sales representative for additional support FEATURES GENERAL FEATURES • Byte/Word mode switchable:    - 524,288 x8 / 262,144 x16 (MX29LV400C)    - 1,048,576 x8 / 524,288 x16 (MX29LV800C)    - 2,097,152 x8 / 1,048,576 x16 (MX29LV160C) • Sector Structure    - 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x 1 64K-Byte x 7 (MX29LV400C), 64K-Byte x 15 (MX29LV800C), 64K-Byte x 31 (MX29LV160C)    - Provides sector protect function to prevent program or erase operation in the protected sector    - Provides chip unprotect function to allow code changing    - Provides temporary sector unprotect function for code changing in previously protected sector • Single Power Supply Operation    - 2.7 to 3.6 volt for read, erase, and program operations • Latch-up protected to 250mA from -1V to Vcc + 1V • Low Vcc write inhibit : Vcc ≤ 1.4V • Compatible with JEDEC standard    - Pinout and software compatible to single power supply Flash • Functional compatible with MX29LV400B/MX29LV800B/MX29LV160B device PERFORMANCE • High Performance    - Fast access time: 45R (MX29LV400C and MX29LV800C only), 55R/70/90ns    - Fast program time: 7us/word typical utilizing accelerate function    - Fast erase time: 0.7s/sector, 15s/chip (typical, MX29LV160C) • Low Power Consumption    - Low active read current: 10mA (typical) at 5MHz    - Low standby current: 200nA (typical) • Minimum 100,000 erase/program cycle • 20 years data retention SOFTWARE FEATURES • Erase Suspend/ Erase Resume    - Suspends sector erase operation to read data from or program data to another sector which is not being erased • Status Reply    - Data# Polling & Toggle bits provide detection of program and erase operation completion • Support Common Flash Interface (CFI) HARDWARE FEATURES • Ready/Busy# (RY/BY#) Output    - Provides a hardware method of detecting program and erase operation completion • Hardware Reset (RESET#) Input    - Provides a hardware method to reset the internal state machine to read mode PACKAGE • 44-Pin SOP • 48-Pin TSOP • 48-Ball TFBGA • 48-Ball LFBGA • 48-Ball WFBGA • 48-Ball XFLGA • All devices are RoHS Compliant

The MX29LV160C T/B product family has been discontinued. The MX29LV160C T/B product family is not recommended for new designs. The MX29LV160D T/B family is the recommended replacement. Please refer to MX29LV160D T/B datasheet for full specifications and ordering information, or contact your local sales representative for additional support FEATURES GENERAL FEATURES • Byte/Word mode switchable:    - 524,288 x8 / 262,144 x16 (MX29LV400C)    - 1,048,576 x8 / 524,288 x16 (MX29LV800C)    - 2,097,152 x8 / 1,048,576 x16 (MX29LV160C) • Sector Structure    - 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x 1 64K-Byte x 7 (MX29LV400C), 64K-Byte x 15 (MX29LV800C), 64K-Byte x 31 (MX29LV160C)    - Provides sector protect function to prevent program or erase operation in the protected sector    - Provides chip unprotect function to allow code changing    - Provides temporary sector unprotect function for code changing in previously protected sector • Single Power Supply Operation    - 2.7 to 3.6 volt for read, erase, and program operations • Latch-up protected to 250mA from -1V to Vcc + 1V • Low Vcc write inhibit : Vcc ≤ 1.4V • Compatible with JEDEC standard    - Pinout and software compatible to single power supply Flash • Functional compatible with MX29LV400B/MX29LV800B/MX29LV160B device PERFORMANCE • High Performance    - Fast access time: 45R (MX29LV400C and MX29LV800C only), 55R/70/90ns    - Fast program time: 7us/word typical utilizing accelerate function    - Fast erase time: 0.7s/sector, 15s/chip (typical, MX29LV160C) • Low Power Consumption    - Low active read current: 10mA (typical) at 5MHz    - Low standby current: 200nA (typical) • Minimum 100,000 erase/program cycle • 20 years data retention SOFTWARE FEATURES • Erase Suspend/ Erase Resume    - Suspends sector erase operation to read data from or program data to another sector which is not being erased • Status Reply    - Data# Polling & Toggle bits provide detection of program and erase operation completion • Support Common Flash Interface (CFI) HARDWARE FEATURES • Ready/Busy# (RY/BY#) Output    - Provides a hardware method of detecting program and erase operation completion • Hardware Reset (RESET#) Input    - Provides a hardware method to reset the internal state machine to read mode PACKAGE • 44-Pin SOP • 48-Pin TSOP • 48-Ball TFBGA • 48-Ball LFBGA • 48-Ball WFBGA • 48-Ball XFLGA • All devices are RoHS Compliant