MUX08FS vs MUX08FSZ vs DG508ADY+ Comparison

Product Details The MUX-08 is a monolithic eight-channel analog multiplexer which connects a single output to one of the eight analog inputs depending upon the state of a 3-bit binary address. The MUX-24 is a monolithic four-channel differential analog multiplexer configured in a double pole, four position (plus OFF) electronic switch array. A two-bit binary input address connects a pair of independent analog inputs from each four channel input section to the corresponding pair of independent analog outputs. All switches in the MUX-08/MUX-24 are turned OFF by applying logic "0" to the ENABLE pin, thereby providing a package select funtion. Fabricated with Precision Monolithics" high performance Bipolar-JFET technology, these devices offer low, constant "ON" resistance, low leakage currents and fast settling time with low crosstalk to satisfy a wide variety of applications. These multiplexors do not suffer from latch-up or static charge blow-out problems associated with similar CMOS parts. The digital inputs are designed to operate form both TTL and CMOS levels while always providing a definite break-before-make action without the need for external pull-up resistors over the full operating temperature range. ### Features and Benefits

.

JFET Switches Rather than CMOS

.

Low "ON" Resistance: 220Ω

.

Highly Resistant to Static Discharge Damage

.

NO SCR Latch-Up Problems

.

Digital Inputs Compatbile with TTL and CMOS

.

125°C Temperature Tested Dice Available

.

MUX-08 Pin Compatible with DG508, HI-508A, IH5108, IH6108, LF11508, 12508, 13508, AD7506

.

See datasheet for additional features

The MUX08FSZ is a monolithic Analog Multiplexer which connects a single output to one of the eight analog inputs depending upon the state of a 3-binary address. All switches in the device are turned OFF by applying logic "0" to the enable pin, thereby providing a package select function.

.

JFET switches rather than CMOS

.

220R Typical low ON resistance

.

Highly resistant to static discharge damage

.

No SCR latch-up problems

.

Digital inputs compatible with TTL and CMOS

.

Pin compatible with DG508, HI-508A, IH5108, IH6108, LF11508/12508/132508, AD7506

The DG508ADY+ is a monolithic CMOS analogue multiplexer in 16 pin NSOIC package. The device is a single 8-channel (1 of 8) multiplexer, this multiplexer will not latchup if the power supply is turned off with the input signal still present. It has faster enable switching times and significantly lower leakage currents, consumes significantly less power, making it ideal for portable equipment.

.

Supply voltage range is ±4.5V to ±18V

.

Operating temperature range from -40°C to 85°C

.

Break before make switching

.

Improved second source

.

Plug-in upgrades for the industry standard DG508A/DG509A

.

Symmetrical, bidirectional operation

.

Logic and enable inputs, TTL and CMOS compatible

.

Latch-up proof construction

.

Monolithic, low power CMOS design