Operational Amplifiers include single, dual or quad amplifiers in space-saving packages. These devices operate down to 1.8 V and feature rail-to-rail inputs and outputs for improved system performance and low current consumption for extended battery life (600 nA for MCP604X and 614X families). These products offer low offset (VOS 150 μV), low bias current, high speed operation (10 MHz), high open-loop gain and other options for the embedded system designer.
Description The Microchip Technology, Inc. MCP621/2/5 family of operational amplifiers features low offset. At power up, these op amps are self-calibrated using mCal. Some package options also provide a calibration/chip select pin (CAL/CS) that supports a low power mode of operation, with offset calibration at the time normal operation is re-started. These amplifiers are optimized for high speed, low noise and distortion, single-supply operation with rail-to-rail output and an input that includes the negative rail. Features • Gain Bandwidth Product: 20 MHz (typical) • Short Circuit Current: 70 mA (typical) • Noise: 13 nV/√Hz (typical, at 1 MHz) • Calibrated Input Offset: ±200 µV (maximum) • Rail-to-Rail Output • Slew Rate: 10 V/µs (typical) • Supply Current: 2.5 mA (typical) • Power Supply: 2.5V to 5.5V • Extended Temperature Range: -40°C to +125°C Typical Applications • Driving A/D Converters • Power Amplifier Control Loops • Barcode Scanners • Optical Detector Amplifier
This general purpose amplifier LTC6084CDD#PBF OP amp from Linear Technology takes a differential voltage input and outputs an amplified voltage signal. This op amp has a temperature range of 0 °C to 70 °C. This device utilizes CMOS technology. This device uses a single power supply. It has 2 channels per chip.