The TC7662ACPA is a charge pump DC-to-DC Converter for process instrumentation. The TC7662A is a pin-compatible upgrade to the industry standard TC7660 charge pump voltage converter. It converts a +3 to +18V input to a corresponding -3 to -18V output using only two low cost capacitors, eliminating inductors and their associated cost, size and EMI. In addition to a wider power supply input range (3 to 18V versus 1.5 to 10V for the TC7660), the TC7662A can source output currents as high as 40mA. The on-board oscillator operates at a nominal frequency of 12kHz. Operation below 12kHz (for lower supply current applications) is also possible by connecting an external capacitor from OSC to ground.
The TC7662AEPA is a charge-pump DC-to-DC Converter converts a 3 to 18V input to a corresponding -3 to -18V output using only two capacitors, eliminating inductors and their associated size and EMI. In addition to a wider power supply input range, the TC7662A can source output currents as high as 40mA. The on-board oscillator operates at a nominal frequency of 12kHz. Operation below 12kHz is also possible by connecting an external capacitor from OSC to ground. It is a pin-compatible upgrade to the industry standard TC7660 charge-pump voltage converter. The TC7662A directly is recommended for designs requiring greater output current and lower input/output voltage drop.