Use the LDO LM1086ISX-5.0/NOPB linear regulator from Texas Instruments to maintain a constant output voltage. Its typical dropout voltage at current is [email protected] V. This voltage regulation device"s single output can produce a current up to 1.5 A. It only needs a voltage of at least 2.6 V while not exceeding 30 V to effectively power your circuit. With a fixed output that has a voltage of 5 V, this is power management at its best. At a load regulation of 0.1%(Typ) and line regulation of 10mV a constant current can be produced at the output of your circuit. Tape and reel packaging will encase this product during shipment, in order to ensure safe delivery and enable quick mounting of components. The maximum dropout voltage is [email protected] V. This voltage regulation device has an operating temperature range of -40 °C to 125 °C. Its polarity is positive.
The LM1086IS-5.0/NOPB is a low dropout Positive Regulator with a dropout of 5V at 1.5A of load current. The device has the same pin-out as TI"s industry standard LM317. Fixed output voltage versions integrate the adjust resistors. The LM1086 circuit includes a Zener trimmed band gap reference, current limiting and thermal shutdown.