We are Apogeeweb Semiconductor Electronic

WELCOME TO OUR BLOG

Home  ISO3088DWR  ISO3088DWR VS ISO3088DWRG4

ISO3088DW vs ISO3088DWR vs ISO3088DWRG4 Comparison

  • Hide Shared Attributes
    ISO3088DW
    ISO3088DW
    ISO3088DWR
    ISO3088DWR
    ISO3088DWRG4
    ISO3088DWRG4
  • Part No.
    ISO3088DW
    ISO3088DWR
    ISO3088DWRG4
  • Description
    Driver; digital isolator; 10mA; Channels:2; 20Mbps; SO16
    RS422, RS485 Digital Isolator 2500Vrms 3Channel 20Mbps 25kV/μs CMTI 16-SOIC (0.295", 7.5mm Width)
    DG ISO 2.5kV RS422/RS485 16SOIC
  • Manufacturer
    TI
    TI
    TI
  • Classification
    Interface ICs
    Interface Isolators
    Interface Isolators
  • Reference Price(USD)
    $3.315
    $2.260
    $3.341
  • Inventory(pcs)
    5.3k
    6.2k
    0
  • Case/Package
    SOIC-16
    SOIC-16
    SOIC-16
  • Number of Pins
    16
    16
    16
  • Number of Channels
    3
    3
    3
  • Data Rate
    20.0 Mbps
    20.0 Mbps
    20.0 Mbps
  • Number of Positions
    16
    -
    -
  • Supply Voltage (DC)
    3.15V (min)
    -
    -
  • Isolation Voltage
    2500 Vrms
    2500 Vrms
    2500 Vrms
  • ECCN Code
    EAR99
    -
    -
  • Supply Current
    15 mA
    -
    15 mA
  • Output Current
    10 mA
    -
    -
  • Drivers Per Package
    1
    1
    1
  • Operating Temperature
    -40℃ ~ 85℃
    -40℃ ~ 85℃
    -40℃ ~ 85℃
  • Thermal Shutdown
    Yes
    Yes
    Yes
  • Size-Length
    10.28 mm
    -
    -
  • Size-Width
    7.52 mm
    -
    -
  • Size-Height
    2.35 mm
    -
    -
  • Mounting Style
    Surface Mount
    Surface Mount
    Surface Mount
  • Packaging
    Tube
    Tape & Reel (TR)
    Tape & Reel (TR)
  • REACH SVHC Compliance
    No SVHC
    -
    -
  • Lead-Free Status
    Lead Free
    Lead Free
    Lead Free
  • RoHS
    RoHS Compliant
    RoHS Compliant
    RoHS Compliant
  • Product Lifecycle Status
    Active
    Active
    Active
  • Supply Voltage (Min)
    3.15 V
    -
    3.15 V
  • Supply Voltage
    3.15.5.5 VDC
    -
    -
  • Supply Voltage (Max)
    5.5 V
    -
    5.5 V
  • Operating Temperature (Max)
    85 ℃
    85 ℃
    85 ℃
  • Operating Temperature (Min)
    -40 ℃
    -40 ℃
    40 ℃
  • Overview
    ISO3088DW Product overview

    The ISO3088DW is an isolated full-duplex RS-485 differential Line Transceiver ideal for long transmission lines because the ground loop is broken to allow for a much larger common-mode voltage range. The symmetrical isolation barrier of the device is tested to provide 2500Vrms of isolation for 60s per UL 1577 between the bus-line transceiver and the logic-level interface. Any cabled I/O can be subjected to electrical noise transients from various sources. This noise transient can cause damage to the transceiver and/or nearby sensitive circuitry if they are of sufficient magnitude and duration. This isolated device can significantly increase protection and reduce the risk of damage to expensive control circuits.

    .
    Thermal shutdown protection
    .
    16pF Typical low bus capacitance
    .
    50kV/µs Typical transient immunity
    .
    Fail-safe receiver for bus open, short or idle
    .
    Meets or exceeds TIA/EIA RS-485 requirements
    .
    Green product and no Sb/Br
    This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
    View all
    ISO3088DWR Product overview

    DESCRIPTION The ISO3080, and ISO3086 are isolated full-duplex differential line drivers and receivers while the ISO3082, and ISO3088 are isolated half-duplex differential line transceivers for TIA/EIA 485/422 applications. These devices are ideal for long transmission lines since the ground loop is broken to allow for a much larger common-mode voltage range. The symmetrical isolation barrier of the device is tested to provide 2500 Vrms of isolation for 60s between the bus-line transceiver and the logic-level interface. Any cabled I/O can be subjected to electrical noise transients from various sources. These noise transients can cause damage to the transceiver and/or near-by sensitive circuitry if they are of sufficient magnitude and duration. These isolated devices can significantly increase protection and reduce the risk of damage to expensive control circuits. The ISO3080, SO3082, ISO3086 and ISO3088 are qualified for use from –40°C to 85°C. FEATURES • 4000-VPEAK Isolation • Bus-Pin ESD Protection – 16 kV HBM Between Bus Pins and GND2 – 6 kV HBM Between Bus Pins and GND1 • 1/8 Unit Load – Up to 256 Nodes on a Bus • Meets or Exceeds TIA/EIA RS-485 Requirements • Signaling Rates up to 20 Mbps • Thermal Shutdown Protection • Low Bus Capacitance – 16 pF (Typ) • 50 kV/µs Typical Transient Immunity • Fail-safe Receiver for Bus Open, Short, Idle • 3.3-V Inputs are 5-V Tolerant APPLICATIONS • Security Systems • Chemical Production • Factory Automation • Motor/Motion Control • HVAC and Building Automation Networks • Networked Security Stations

    View all
    ISO3088DWRG4 Product overview

    DESCRIPTION The ISO3080, and ISO3086 are isolated full-duplex differential line drivers and receivers while the ISO3082, and ISO3088 are isolated half-duplex differential line transceivers for TIA/EIA 485/422 applications. These devices are ideal for long transmission lines since the ground loop is broken to allow for a much larger common-mode voltage range. The symmetrical isolation barrier of the device is tested to provide 2500 Vrms of isolation for 60s between the bus-line transceiver and the logic-level interface. Any cabled I/O can be subjected to electrical noise transients from various sources. These noise transients can cause damage to the transceiver and/or near-by sensitive circuitry if they are of sufficient magnitude and duration. These isolated devices can significantly increase protection and reduce the risk of damage to expensive control circuits. The ISO3080, SO3082, ISO3086 and ISO3088 are qualified for use from –40°C to 85°C. FEATURES • 4000-VPEAK Isolation • Bus-Pin ESD Protection – 16 kV HBM Between Bus Pins and GND2 – 6 kV HBM Between Bus Pins and GND1 • 1/8 Unit Load – Up to 256 Nodes on a Bus • Meets or Exceeds TIA/EIA RS-485 Requirements • Signaling Rates up to 20 Mbps • Thermal Shutdown Protection • Low Bus Capacitance – 16 pF (Typ) • 50 kV/µs Typical Transient Immunity • Fail-safe Receiver for Bus Open, Short, Idle • 3.3-V Inputs are 5-V Tolerant APPLICATIONS • Security Systems • Chemical Production • Factory Automation • Motor/Motion Control • HVAC and Building Automation Networks • Networked Security Stations

    View all

ISO3088DWR Alternative Parts

Image Part Compare Manufacturer Category Description
Image:ISO3088DWR Mfr.Part#:ISO3088DWR Compare: Current Part Manufacturers:TI Category:Interface Isolators Description:RS422, RS485 Digital Isolator 2500Vrms 3Channel 20Mbps 25kV/μs CMTI 16-SOIC (0.295", 7.5mm Width)
Image:ISO3088DW Mfr.Part#:ISO3088DW Compare: ISO3088DWR VS ISO3088DW Manufacturers:TI Category:Interface ICs Description:Driver; digital isolator; 10mA; Channels:2; 20Mbps; SO16
Image:ISO3088DWG4 Mfr.Part#:ISO3088DWG4 Compare: ISO3088DWR VS ISO3088DWG4 Manufacturers:TI Category:Interface Isolators Description:DG ISO 2.5kV RS422/RS485 16SOIC
Image:ISO3088DWRG4 Mfr.Part#:ISO3088DWRG4 Compare: ISO3088DWR VS ISO3088DWRG4 Manufacturers:TI Category:Interface Isolators Description:DG ISO 2.5kV RS422/RS485 16SOIC