Home  FPF2104  FPF2104 VS FPF2106

FPF2104 vs FPF2104 vs AP2141WG-7 Comparison

  • Hide Shared Attributes
    FPF2104
    FPF2104
    AP2141WG-7
    AP2141WG-7
  • Part No.
    FPF2104
    FPF2104
    AP2141WG-7
  • Description
    Current Limit SW 1IN 1Out 1.8V to 5.5V 0.4A 5Pin SOT-23 T/R
    Current Limit SW 1IN 1Out 1.8V to 5.5V 0.4A 5Pin SOT-23 T/R
    USB Power SW Hi Side Single 5.5V 0.8A 5Pin SOT-25 T/R
  • Manufacturer
    On semiconductor
    On semiconductor
    Diodes
  • Classification
    Power Management
    Power Management
    Hot Swap & Power Distribution
  • Reference Price(USD)
    $0.538
    $0.538
    $0.106
  • Inventory(pcs)
    0
    0
    0
  • Case/Package
    SOT-23-5
    SOT-23-5
    SOT-23-5
  • Number of Pins
    5
    5
    5
  • Power Rating
    667 mW
    667 mW
    -
  • Power Dissipation
    667 mW
    667 mW
    -
  • Number of Positions
    5
    5
    -
  • Operating Voltage
    -
    -
    -
  • Rise Time
    -
    -
    600 µs
  • Drain to Source Resistance (on) (Rds)
    -
    -
    -
  • Input Voltage (DC)
    -
    -
    -
  • Output Voltage
    -
    -
    -
  • Polarity
    -
    -
    -
  • Supply Voltage (DC)
    -
    -
    -
  • ECCN Code
    EAR99
    EAR99
    EAR99
  • Output Current
    -
    -
    -
  • Number of Outputs
    1
    1
    1
  • Operating Temperature
    -40℃ ~ 85℃
    -40℃ ~ 85℃
    -40℃ ~ 85℃ (TA)
  • Size-Length
    3 mm
    3 mm
    -
  • Size-Width
    1.7 mm
    1.7 mm
    -
  • Size-Height
    1.25 mm
    1.25 mm
    -
  • Mounting Style
    Surface Mount
    Surface Mount
    Surface Mount
  • Packaging
    Tape & Reel (TR)
    Tape & Reel (TR)
    Tape & Reel (TR)
  • REACH SVHC Compliance
    -
    -
    -
  • Lead-Free Status
    Lead Free
    Lead Free
    Lead Free
  • RoHS
    RoHS Compliant
    RoHS Compliant
    RoHS Compliant
  • Product Lifecycle Status
    Active
    Active
    Active
  • Input Voltage (Min)
    1.8 V
    1.8 V
    2.7 V
  • Supply Voltage (Max)
    -
    -
    -
  • Output Current (Max)
    0.4 A
    0.4 A
    500 mA
  • Supply Voltage (Min)
    -
    -
    -
  • Output Current (Min)
    0.4 A
    0.4 A
    -
  • Input Voltage
    1.8V ~ 5.5V
    1.8V ~ 5.5V
    2.7V ~ 5.5V
  • Fall Time
    -
    -
    50 µs
  • Number of Inputs
    1
    1
    -
  • Switch on Resistance
    0.16 Ohm
    0.16 Ohm
    -
  • Operating Temperature (Max)
    85 ℃
    85 ℃
    85 ℃
  • Operating Temperature (Min)
    -40 ℃
    -40 ℃
    -40 ℃
  • Power Dissipation (Max)
    667 mW
    667 mW
    -
  • Input Voltage (Max)
    5.5 V
    5.5 V
    5.5 V
  • REACH SVHC Compliance Edition
    -
    -
    -
  • Overview
    FPF2104 Product overview

    The FPF2100 through FPF2107 is a family of load switches which provide full protection to systems and loads which may encounter large current conditions. These devices contain a 0.125W current-limited P-channel MOSFET which can operate over an input voltage range of 1.8-5.5V. Switch control is by a logic input (ON) capable of interfacing directly with low voltage control signals. Each part contains thermal shutdown protection which shuts off the switch to prevent damage to the part when a continuous over-current condition causes excessive heating. When the switch current reaches the current limit, the part operates in a constant-current mode to prohibit excessive currents from causing damage. For the FPF2100-FPF2102 and FPF2104-FPF2106, if the constant current condition still persists after 10ms, these parts will shut off the switch and pull the fault signal pin (FLAGB) low. The FPF2100, FPF2101, FPF2104 and FPF2105, have an auto-restart feature which will turn the switch on again after 160ms if the ON pin is still active. The FPF2102 and FPF2106 do not have this auto-restart feature so the switch will remain off until the ON pin is cycled. For the FPF2103 and FPF2107, a current limit condition will immediately pull the fault signal pin low and the part will remain in the constant-current mode until the switch current falls below the current limit. For the FPF2100 through FPF2103, the minimum current limit is 200mA while that for the FPF2104 through FPF2107 is 400mA. These parts are available in a space-saving 5 pin SOT23 package Features ---  

    .
    1.8 to 5.5V Input Voltage Range
    .
    Controlled Turn-On
    .
    200mA and 400mA Current Limit Options
    .
    Undervoltage Lockout
    .
    Thermal Shutdown
    .
    <1uA Shutdown Current
    .
    Auto restart
    .
    Fast Current limit Response Time
    .
    3us to Moderate Over Currents
    .
    20ns to Hard Shorts
    .
    Fault Blanking
    .
    RoHS Compliant
    View all
    FPF2104 Product overview

    The FPF2100 through FPF2107 is a family of load switches which provide full protection to systems and loads which may encounter large current conditions. These devices contain a 0.125W current-limited P-channel MOSFET which can operate over an input voltage range of 1.8-5.5V. Switch control is by a logic input (ON) capable of interfacing directly with low voltage control signals. Each part contains thermal shutdown protection which shuts off the switch to prevent damage to the part when a continuous over-current condition causes excessive heating. When the switch current reaches the current limit, the part operates in a constant-current mode to prohibit excessive currents from causing damage. For the FPF2100-FPF2102 and FPF2104-FPF2106, if the constant current condition still persists after 10ms, these parts will shut off the switch and pull the fault signal pin (FLAGB) low. The FPF2100, FPF2101, FPF2104 and FPF2105, have an auto-restart feature which will turn the switch on again after 160ms if the ON pin is still active. The FPF2102 and FPF2106 do not have this auto-restart feature so the switch will remain off until the ON pin is cycled. For the FPF2103 and FPF2107, a current limit condition will immediately pull the fault signal pin low and the part will remain in the constant-current mode until the switch current falls below the current limit. For the FPF2100 through FPF2103, the minimum current limit is 200mA while that for the FPF2104 through FPF2107 is 400mA. These parts are available in a space-saving 5 pin SOT23 package Features ---  

    .
    1.8 to 5.5V Input Voltage Range
    .
    Controlled Turn-On
    .
    200mA and 400mA Current Limit Options
    .
    Undervoltage Lockout
    .
    Thermal Shutdown
    .
    <1uA Shutdown Current
    .
    Auto restart
    .
    Fast Current limit Response Time
    .
    3us to Moderate Over Currents
    .
    20ns to Hard Shorts
    .
    Fault Blanking
    .
    RoHS Compliant
    View all
    AP2141WG-7 Product overview

    AP2141 Series 120 mO 0.8 A Single Channel Current-Limited Power Switch- SOT-25

    View all

FPF2104 Alternative Parts

Image Part Compare Manufacturer Category Description
Image:FPF2104 Mfr.Part#:FPF2104 Compare: Current Part Manufacturers:Fairchild Category:Hot Swap & Power Distribution Description:Current limit sw 1in 1out 1.8v to 5.5v 0.4a 5pin sot-23 t/r
Image:AP2151WG-7 Mfr.Part#:AP2151WG-7 Compare: FPF2104 VS AP2151WG-7 Manufacturers:Diodes Category:Hot Swap & Power Distribution Description:Usb power sw hi side single 5.5v 0.8a 5pin sot-25 t/r
Image:FPF2104 Mfr.Part#:FPF2104 Compare: FPF2104 VS FPF2104 Manufacturers:On semiconductor Category:Power Management Description:Current limit sw 1in 1out 1.8v to 5.5v 0.4a 5pin sot-23 t/r
Image:FPF2106 Mfr.Part#:FPF2106 Compare: FPF2104 VS FPF2106 Manufacturers:On semiconductor Category: Description:Current limit sw 1in 1out 1.8v to 5.5v 0.4a 5pin sot-23 t/r