Home  FPF2001  FPF2001 VS FPF2002

FPF2001 vs FPF2002 Comparison

  • Hide Shared Attributes
    FPF2001
    FPF2001
    FPF2002
    FPF2002
  • Part No.
    FPF2001
    FPF2002
  • Description
    Current Limit SW 1IN 1Out 1.8V to 5.5V 0.1A 5Pin SC-70 T/R
    Current Limit SW 1IN 1Out 1.8V to 5.5V 0.1A 5Pin SC-70 T/R
  • Manufacturer
    On semiconductor
    Fairchild
  • Classification
    Power Management
    Hot Swap & Power Distribution
  • Reference Price(USD)
    $0.152
    $0.275
  • Inventory(pcs)
    4.5k
    0
  • Case/Package
    SC-88-5
    SC-70-5
  • Number of Pins
    5
    5
  • Power Rating
    250 mW
    250 mW
  • Power Dissipation
    250 mW
    0.25 W
  • Drain to Source Resistance (on) (Rds)
    -
    700 mΩ
  • Output Voltage
    -
    ≤6.00 V
  • Polarity
    -
    P-Channel
  • ECCN Code
    EAR99
    EAR99
  • Supply Voltage (DC)
    -
    5.00 V
  • Output Current
    -
    0.1 A
  • Number of Outputs
    1
    1
  • Operating Temperature
    -40℃ ~ 85℃
    -40℃ ~ 85℃ (TA)
  • Size-Length
    2 mm
    2 mm
  • Size-Width
    1.25 mm
    1.25 mm
  • Size-Height
    1 mm
    1 mm
  • Mounting Style
    Surface Mount
    Surface Mount
  • Packaging
    Tape & Reel (TR)
    Tape & Reel (TR)
  • Lead-Free Status
    Lead Free
    Lead Free
  • RoHS
    RoHS Compliant
    RoHS Compliant
  • Product Lifecycle Status
    Active
    Active
  • Operating Temperature (Min)
    -40 ℃
    -40 ℃
  • Output Current (Min)
    0.05 A
    -
  • Power Dissipation (Max)
    250 mW
    250 mW
  • Number of Inputs
    1
    1
  • Supply Voltage (Max)
    -
    5.5 V
  • Operating Temperature (Max)
    85 ℃
    85 ℃
  • Input Voltage (Max)
    5.5 V
    5.5 V
  • Supply Voltage (Min)
    -
    1.8 V
  • Input Voltage (Min)
    1.8 V
    1.8 V
  • Input Voltage
    1.8V ~ 5.5V
    1.8V ~ 5.5V
  • Output Current (Max)
    0.1 A
    50 mA
  • Switch on Resistance
    0.7 Ohm
    0.7 ohm
  • Overview
    FPF2001 Product overview

    The FPF2000 through FPF2007 is a family of load switches which provide full protection to systems and loads which may encounter large current conditions. These devices contain a 0.7W current-limited P-channel MOSFET which can operate over an input voltage range of 1.8-5.5V. Switch control is by a logic input (ON) capable of interfacing directly with low voltage control signals. Each part contains thermal shutdown protection which shuts off the switch to prevent damage to the part when a continuous over-current condition causes excessive heating. When the switch current reaches the current limit, the part operates in a constant current mode to prohibit excessive currents from causing damage. For the FPF2000-FPF2002 and FPF2004-FPF2006, if the constant current condition still persists after 10ms, these parts will shut off the switch and pull the fault signal pin (FLAGB) low. The FPF2000, FPF2001, FPF2004 and FPF2005, have an auto-restart feature which will turn the switch on again after 80ms if the ON pin is still active. The FPF2002 and FPF2006 do not have this auto-restart feature so the switch will remain off until the ON pin is cycled. For the FPF2003 and FPF2007, a current limit condition will immediately pull the fault signal pin low and the part will remain in the constant-current mode until the switch current falls below the current limit. For the FPF2000 through FPF2003, the minimum current limit is 50mA while that for the FPF2004 through FPF2007 is 100mA. These parts are available in a space-saving 5 pin SC-70 package. Features ---  

    .
    1.8 to 5.5V Input Voltage Range
    .
    Controlled Turn-On
    .
    50mA and 100mA Current Limit Options
    .
    Undervoltage Lockout
    .
    Thermal Shutdown
    .
    <1uA Shutdown Current
    .
    Auto restart
    .
    Fast Current limit Response Time
    .
    3us to Moderate Over Currents
    .
    20ns to Hard Shorts
    .
    Fault Blanking
    View all
    FPF2002 Product overview

    This FPF2002 load switch from Fairchild Semiconductor is a must-have to protect your system from any abnormal spikes of current or short circuiting. This current limited load switch"s single output can produce a current up to 0.1 A. This will operate at a minimum voltage of 1.8 V and a maximum voltage of 5.5 V, making it easy to control the power in your circuit. This component will be shipped in tape and reel packaging to allow for effective mounting and safe delivery. This current limited load switch has an operating temperature range of -40 °C to 85 °C.

    View all

FPF2001 Alternative Parts

Image Part Compare Manufacturer Category Description
Image:FPF2001 Mfr.Part#:FPF2001 Compare: Current Part Manufacturers:On semiconductor Category:Power Management Description:Current limit sw 1in 1out 1.8v to 5.5v 0.1a 5pin sc-70 t/r
Image:FPF2000 Mfr.Part#:FPF2000 Compare: FPF2001 VS FPF2000 Manufacturers:Fairchild Category:Hot Swap & Power Distribution Description:Current limit sw 1in 1out 1.8v to 5.5v 0.1a 5pin sc-70 t/r
Image:FPF2002 Mfr.Part#:FPF2002 Compare: FPF2001 VS FPF2002 Manufacturers:Fairchild Category:Hot Swap & Power Distribution Description:Current limit sw 1in 1out 1.8v to 5.5v 0.1a 5pin sc-70 t/r
Image:FPF2003 Mfr.Part#:FPF2003 Compare: FPF2001 VS FPF2003 Manufacturers:Fairchild Category:Hot Swap & Power Distribution Description:Current limit sw 1in 1out 1.8v to 5.5v 0.1a 5pin sc-70 t/r