GENERAL DESCRIPTION The MX29F002T/B is a 2-mega bit Flash memory organized as 256K bytes of 8 bits only. MXICs Flash memories offer the most cost-effective and reliable read/write nonvolatile random access memory. The MX29F002T/B is packaged in 32-pin PDIP,PLCC and 32-pin TSOP(I). It is designed to be reprogrammed and erased in-system or in standard EPROM programmers. FEATURES • 262,144x 8 only • Fast access time: 55/70/90/120ns • Low power consumption - 30mA maximum active current(5MHz) - 1uA typical standby current • Programming and erasing voltage 5V ± 10% • Command register architecture - Byte Programming (7us typical) - Sector Erase (16K-Byte x1, 8K-Byte x 2, 32K-Byte x1, and 64K-Byte x 3) • Auto Erase (chip & sector) and Auto Program - Automatically erase any combination of sectors or the whole chip with Erase Suspend capability. - Automatically programs and verifies data at specified address • Erase Suspend/Erase Resume - Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the erase operation. • Status Reply - Data polling & Toggle bit for detection of program and erase cycle completion. • Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Sector protect/unprotect for 5V only system or 5V/12V system • 100,000 minimum erase/program cycles • Latch-up protected to 100mA from -1 to VCC+1V • Boot Code Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector • Hardware RESET pin(only for 29F002T/B) - Resets internal state machine to read mode • Low VCC write inhibit is equal to or less than 3.2V • Package type: - 32-pin PDIP - 32-pin PLCC - 32-pin TSOP (Type 1) • 20 years data retention