Home  74ABT821DB,118  74ABT821DB,118 VS 74ABT821DB

74ABT821DB,118 vs 74ABT821DB,112 vs SN74ABT821ADBR Comparison

  • Hide Shared Attributes
    74ABT821DB,118
    74ABT821DB,118
    74ABT821DB,112
    74ABT821DB,112
    SN74ABT821ADBR
    SN74ABT821ADBR
  • Part No.
    74ABT821DB,118
    74ABT821DB,112
    SN74ABT821ADBR
  • Description
    Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1Element 24Pin SSOP T/R
    Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1Element 24Pin SSOP Bulk
    Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1Element 24Pin SSOP T/R
  • Manufacturer
    Nxp
    Nxp
    N/A
  • Classification
    Flip Flops
    Flip Flops
    Flip Flops
  • Reference Price(USD)
    $0.772
    $0.841
    $0.914
  • Inventory(pcs)
    0
    0
    0
  • Case/Package
    SSOP-24
    SSOP-24
    SSOP-24
  • Number of Pins
    -
    24
    24
  • Number of Bits
    -
    -
    10
  • Clock Speed
    185 MHz
    185 MHz
    125 MHz
  • Frequency
    -
    -
    125 MHz
  • Propagation Delay Max (tpd)
    -
    -
    6.90 ns
  • Number of Circuits
    1
    -
    1
  • Input Capacitance
    4 pF
    4 pF
    3.5 pF
  • Polarity
    -
    -
    Non-Inverting
  • Supply Voltage (DC)
    -
    -
    4.50V ~ 5.50V
  • Voltage Nodes
    -
    -
    5.00 V
  • Output Current
    -
    -
    64.0 mA
  • Output Current Drive
    -
    -
    -500 µA
  • Number of Outputs
    -
    -
    10
  • Operating Temperature
    -40℃ ~ 85℃ (TA)
    -40℃ ~ 85℃ (TA)
    -40℃ ~ 85℃ (TA)
  • Size-Height
    -
    1.8 mm
    -
  • Mounting Style
    Surface Mount
    Surface Mount
    Surface Mount
  • Packaging
    Tape & Reel (TR)
    Bulk
    Tape & Reel (TR)
  • Lead-Free Status
    Lead Free
    Lead Free
    Lead Free
  • RoHS
    RoHS Compliant
    RoHS Compliant
    RoHS Compliant
  • Product Lifecycle Status
    Active
    Active
    Active
  • Supply Voltage (Max)
    5.5 V
    -
    5.5 V
  • Supply Voltage (Min)
    4.5 V
    -
    4.5 V
  • Operating Temperature (Max)
    -
    85 ℃
    -
  • Operating Temperature (Min)
    -
    -40 ℃
    -
  • Supply Voltage
    4.5V ~ 5.5V
    4.5V ~ 5.5V
    4.5V ~ 5.5V
  • Overview
    74ABT821DB,118 Product overview

    Flip Flop 1 Element D-Type 10 Bit Positive Edge 24-SSOP (0.209", 5.30mm Width)

    View all
    74ABT821DB,112 Product overview

    Flip Flop 1 Element D-Type 10 Bit Positive Edge 24-SSOP (0.209", 5.30mm Width)

    View all
    SN74ABT821ADBR Product overview

    These 10-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing wider buffer registers, I/O ports, bidirectional bus drivers with parity, and working registers. The ten flip-flops are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the devices provide true data at the Q outputs. A buffered output-enable (OE\\\\) input can be used to place the ten outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components. OE\ does not affect the internal operations of the latch. Previously stored data can be retained or new data can be entered while the outputs are in the high-impedance state. When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54ABT821 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT821A is characterized for operation from -40°C to 85°C.

    View all

74ABT821DB,118 Alternative Parts

Image Part Compare Manufacturer Category Description
Image:74ABT821DB,118 Mfr.Part#:74ABT821DB,118 Compare: Current Part Manufacturers:Nxp Category:Flip Flops Description:Flip flop d-type bus interface pos-edge 3-st 1element 24pin ssop t/r
Image:74ABT821DB,112 Mfr.Part#:74ABT821DB,112 Compare: 74ABT821DB,118 VS 74ABT821DB,112 Manufacturers:Nxp Category:Flip Flops Description:Flip flop d-type bus interface pos-edge 3-st 1element 24pin ssop bulk
Image:74ABT821DB Mfr.Part#:74ABT821DB Compare: 74ABT821DB,118 VS 74ABT821DB Manufacturers:Nxp Category:Flip Flops Description:10bit driver, true output, ssop24
Image:74ABT821DB-T Mfr.Part#:74ABT821DB-T Compare: 74ABT821DB,118 VS 74ABT821DB-T Manufacturers:Nxp Category: Description:Flip flops 10-bit d-type 3-s