The CD4052BE is a differential, four channel, CMOS analogue multiplexer/demultiplexer with logic level conversion in 16 pin DIP package. It is digitally controlled analogue switch having low ON impedance and very low OFF leakage current. This multiplexer circuit dissipate extremely low quiescent power over full VDD - VSS and VDD - VEE supply voltage ranges which is independent of logic state of control signals.

.

4:1 multiplexer configuration

.

Wide range of digital and analogue signal levels (digital: 3V to 20V, analogue :

.

Low on-resistance is typically 125ohm over 15V peak to peak voltage

.

Binary address decoding on chip

.

5V, 10V and 15V parametric ratings

.

100% tested for quiescent current at 20V

.

Maximum input current of 1µA at 18V over full temperature range and 100nA at 18V and 25°C

.

Break before make switching eliminates channel overlap

.

Supply voltage range from 5V to 18V

.

Operating temperature range from -55°C to 125°C

The CD4053BPW is a triple 2-channel Analog Multiplexer having three separate digital control inputs, A, B and C and an inhibit input. Each control input selects one of a pair of channels which are connected in a single-pole, double-throw configuration. When these devices are used as demultiplexers, the channel IN/OUT terminals are the outputs and the COMMON OUT/IN terminals are the inputs. The device is digitally-controlled analog switches having low ON impedance and very low OFF leakage current. These multiplexer circuits dissipate extremely low quiescent power over the full VDD-VSS and VDD-VEE supply-voltage ranges, independent of the logic state of the control signals. When logic 1 is present at the inhibit-input terminal, all channels are off.

.

125R (typical) Low ON resistance over 15VP-P

.

18V Signal input range for VDD - VEE

.

±100pA (Typical) High OFF resistance, channel leakage at VDD-VEE = 18 V

.

Logic-level conversion for digital addressing signals

.

Binary address decoding on chip

.

100% Tested for quiescent current at 20V

.

1µA Maximum input current at 18V over full package temperature range, 100nA at 18V and 25°C

.

Break-before-make switching eliminates channel overlap

2 Circuit IC Switch 2:4 280Ohm 16-DIP