08053C105K4T2A vs 08053C105K4Z2A vs CC0805KKX7R8BB105 Comparison

1µF ±10% 25V Ceramic Capacitor X7R 0805 (2012 Metric)

The 08053C105K4Z2A is a Multilayer Ceramic Capacitor with Ni/Sn-plated termination, X7R dielectric and 0805 case. A multilayer ceramic (MLC) capacitor is a monolithic block of ceramic containing two sets of offset, interleaved planar electrodes that extend to two opposite surfaces of the ceramic dielectric. X7R formulations are called temperature stable ceramics and fall into EIA class II materials. X7R is the most popular of these intermediate dielectric constant materials. This capacitance change is non-linear. Capacitance for X7R varies under the influence of electrical operating conditions such as voltage and frequency. X7R dielectric chip usage covers the broad spectrum of industrial applications where known changes in capacitance due to applied voltages are acceptable.

.

Reflow/wave soldering

.

EIA 0402, 0603, 0805, 1206, 1210, 1812, 2220 case sizes available

.

Rated voltage of 16VDC, 25VDC, 50VDC, 100VDC, 200VDC and 500VDC

.

±1%, ±2%, ±5%, ±10% and ±20% tolerance

.

Reduction in circuit board flex failures

.

Soft termination offers improved reliability performance

.

Operating temperature range -55°C to 125°C

The Yageo CC series capacitors are Multilayer Ceramic Chip Capacitors (MLCC) with Class 2, X7R dielectric material used for general purpose applications. These capacitors consist of a rectangular block of ceramic dielectric materials that contains number of interleaved metal electrodes. This structure gives rise to a high capacitance per unit volume. The inner electrodes are connected to the two end terminations and covered with a layer of plated tin (NiSn).

.

Ultra small ceramic capacitors with larger capacitance value

.

Capacitance value ranging from 100pF to 22µF

.

0201, 0402, 0603, 0805, 1206, 1210, 1812 case sizes available

.

DC voltage rating of 6.3V to 50V

.

High temperature range of -55°C to 125°C

.

Nickel barrier end termination

.

Good reliability with qualification of IEC60068

.

Available in ±5%, ±10% and ±20% tolerance