0603B104K160CT vs 0603YC104K4Z2A vs 0603YC104KAT2A Comparison

The general purpose series capacitors from Walsin are X7R dielectric multilayer ceramic chip capacitors (MLCC) that provides high electrical precision, stability and reliability. These MLCC capacitors consist of a conducting material and electrodes. The high density and high efficiency ceramic condensers are used to manufacture chip type miniaturized MLCC capacitors.

.

Capacitance values ranges from 100pF to 47µF

.

EIA 0201, 0402, 0603, 0805, 1206, 1210, 1812 case sizes available

.

Available voltage ratings are 6.3V, 10V, 16V, 25V, 35V, 50V, 100V

.

Operating temperature range from -55°C to 125°C

.

Available in ±5%, ±10%, ±20% tolerance

.

Small size with higher capacitance values

.

Cu/Ni/Sn termination

The AVX FLEXITERM automotive MLCC are multilayer ceramic chip capacitors with X7R dielectric material and flexible terminations. The capacitance value ranges from 0.22nF to 22µF. FLEXITERM is designed to enhance mechanical flexure and temperature cycling performance of a standard ceramic capacitor. The industry standard for flexure is 2mm, FLEXITERM provides up to 5mm of flexure without internal cracks. These capacitors provide improved performance compared to standard termination capacitors. The automotive grade FLEXITERM capacitors provide a design engineer with satisfactory solution for designing PCB"s which may be subject to high levels of board flexure.

.

Automotive grade AEC-Q200 compliant

.

EIA 0402, 0603, 0805, 1206, 1210, 1812, 2220 case sizes available

.

Rated voltage of 16VDC, 25VDC, 50VDC, 100VDC, 200VDC and 500VDC

.

±1%, ±2%, ±5%, ±10% and ±20% tolerance

.

Reduction in circuit board flex failures

.

Soft termination offers improved reliability performance

.

Operating temperature range -55°C to 125°C

The 0603YC104KAT2A is a Multilayer Ceramic Capacitor with Ni/Sn-plated termination, X7R dielectric and 0603 case. A multilayer ceramic (MLC) capacitor is a monolithic block of ceramic containing two sets of offset, interleaved planar electrodes that extend to two opposite surfaces of the ceramic dielectric. X7R formulations are called temperature stable ceramics and fall into EIA class II materials. X7R is the most popular of these intermediate dielectric constant materials. This capacitance change is non-linear. Capacitance for X7R varies under the influence of electrical operating conditions such as voltage and frequency. X7R dielectric chip usage covers the broad spectrum of industrial applications where known changes in capacitance due to applied voltages are acceptable.

.

Reflow/wave soldering

.

EIA 0101, 0201, 0402, 0603, 0805, 1206, 1210, 1812, 1825, 2220, 2225 case sizes available

.

Rated DC voltage of 4V, 6.3V, 10V, 16V, 25V, 50V, 100V, 200V, 500V

.

±5%, ±10% and ±20% tolerance

.

Available in FLEXITERM/gold/Nickel (Ni) and tin (Sn) plated terminations

.

Load life of 1000h at 125˚C

.

Operating temperature range from -55˚C to 125˚C