06035A221JAT2A vs 06035A221JAT4A vs CC0603JRNPO9BN221 Comparison

The 06035A221JAT2A is a Multilayer Ceramic Capacitor with Ni/Sn-plated termination, C0G (NP0) dielectric and 0603 case. A multilayer ceramic (MLC) capacitor is a monolithic block of ceramic containing two sets of offset, interleaved planar electrodes that extend to two opposite surfaces of the ceramic dielectric. C0G (NP0) is the most popular formulation of the temperature-compensating, EIA Class I ceramic materials. Modern C0G (NP0) formulations contain neodymium, samarium and other rare earth oxides. C0G (NP0) ceramics offer one of the most stable capacitor dielectrics available. Capacitance drift or hysteresis for C0G (NP0) ceramics is negligible at less than ±0.05% versus up to ±2% for films. Typical capacitance change with life is less than ±0.1% for C0G (NP0), one-fifth that shown by most other dielectrics. C0G (NP0) formulations show no aging characteristics.

.

Reflow/wave soldering

.

EIA 0101, 0201, 0402, 0603, 0805, 1206, 1210, 1812, 1825, 2220, 2225 case sizes available

.

Rated DC voltage of 6.3V, 10V, 16V, 25V, 50V, 100V, 200V, 500V

.

±0.10pF, ±0.25pF, ±0.50pF, ±1%, ±2%, ±5% and ±10% tolerance

.

Nickel (Ni) and tin (Sn) plated terminations

.

Load life of 1000h at 125˚C

.

Operating temperature range from -55˚C to 125˚C

The Yageo CC series capacitors are Multilayer Ceramic Chip Capacitors (MLCC) with Class 1, NP0 dielectric material used for general purpose applications. These capacitors consist of a rectangular block of ceramic dielectric materials that contains number of interleaved metal electrodes. This structure gives rise to a high capacitance per unit volume. The inner electrodes are connected to the two end terminations and covered with a layer of plated tin (NiSn).

.

Ultra small ceramic capacitors with larger capacitance value

.

Capacitance value ranging from 0.22pF to 100nF

.

0201, 0402, 0603, 0805, 1206, 1210, 1812 case sizes available

.

DC voltage rating of 16V to 50V

.

High temperature range of -55°C to 125°C

.

Temperature coefficient (TCR) of ±30ppm/°C

.

Nickel barrier end termination

.

Good reliability with qualification of IEC60068