04023C103KAT2A vs C0402C103K3RAC7867 vs GRM155R71E103KA01D Comparison

The 04023C103KAT2A is a Multilayer Ceramic Capacitor with Ni/Sn-plated termination, X7R dielectric and 0402 case. A multilayer ceramic (MLC) capacitor is a monolithic block of ceramic containing two sets of offset, interleaved planar electrodes that extend to two opposite surfaces of the ceramic dielectric. X7R formulations are called temperature stable ceramics and fall into EIA class II materials. X7R is the most popular of these intermediate dielectric constant materials. This capacitance change is non-linear. Capacitance for X7R varies under the influence of electrical operating conditions such as voltage and frequency. X7R dielectric chip usage covers the broad spectrum of industrial applications where known changes in capacitance due to applied voltages are acceptable.

.

Reflow/wave soldering

.

EIA 0101, 0201, 0402, 0603, 0805, 1206, 1210, 1812, 1825, 2220, 2225 case sizes available

.

Rated DC voltage of 4V, 6.3V, 10V, 16V, 25V, 50V, 100V, 200V, 500V

.

±5%, ±10% and ±20% tolerance

.

Available in FLEXITERM/gold/Nickel (Ni) and tin (Sn) plated terminations

.

Load life of 1000h at 125˚C

.

Operating temperature range from -55˚C to 125˚C

Cap Ceramic 0.01uF 25V X7R 10% SMD 0402 125°C Paper T/R

The Murata GRM series capacitors are Multilayer Ceramic Chip Capacitors (MLCC) used for general purpose applications. These MLCC capacitors are classified into temperature compensating and high dielectric constant types depending on the change in electrostatic capacitance due to change in temperature. The temperature compensating capacitors feature a small rate of change in electrostatic capacitance as the temperature changes and are used for applications such as filters and high frequency circuit matching. The high dielectric constant capacitors use materials with a high dielectric constant and feature a large electrostatic capacitance. Typical applications are power supply decoupling and smoothing circuits.

.

Large capacity and small size in a multilayer structure

.

Capacitance value ranging from 0.1pF to 220µF

.

Tin plated external electrodes, excellent solderability

.

Provides good high frequency characteristics

.

Excellent pulse response

.

High reliability

.

Capacitor size varies from 0.4×0.2mm to 5.7×5.0mm

.

Rated voltage of 2.5VDC to 3.15KVDC

.

Temperature characteristics are classified according to JIS and EIA standard

.

Operating temperature changes according to TCR values