Home  Product Technical Articles   UWS-5/10-Q48N-C used for electrical appliance: CAD Models, Datasheet, Appliance, Features [FAQ&Video]

UWS-5/10-Q48N-C used for electrical appliance: CAD Models, Datasheet, Appliance, Features [FAQ&Video]

Author: Susie
Date: 30 Jan 2023
 433
UWS-5/10-Q48N-C in automotive

Catalog

UWS-5/10-Q48N-C Overview

UWS-5/10-Q48N-C Related Video Introduction

UWS-5/10-Q48N-C CAD Models

UWS-5/10-Q48N-C Connection Diagram

UWS-5/10-Q48N-C Technical Specifications

UWS-5/10-Q48N-C Features

UWS-5/10-Q48N-C Applications

UWS-5/10-Q48N-C Datasheet

UWS-5/10-Q48N-C Specifications

UWS-5/10-Q48N-C Shipping Trays And Boxes & Through-Hole Mount

UWS-5/10-Q48N-C Manufacturer

UWS-5/10-Q48N-C Performance Specification Notes

UWS-5/10-Q48N-C FAQs

 

UWS-5/10-Q48N-C Overview


Kynix offers technology dedicated to the oversight of a battery pack and is considering a wireless battery management system. The DC DC converter UWS-5/10-Q48N-C provides high output current (up to 15 amps) in a "sixteenth brick" package that does not require a heat sink in most applications. The device also has various applications when operating ranges from -40°C to +85°C temperature.


Video Description: It describes the DC-DC converter in an electrical vehicle. DC/DC Converter: This is one of the electric car parts that convert high-voltage DC power from the traction battery pack to low-voltage DC power to drive the vehicle's accessories and recharge the auxiliary battery. 

 


UWS-5/10-Q48N-C CAD Models


The UWS-5/10-Q48N-C CAD Models are as follows.

 

 

Figure: UWS-5/10-Q48N-C CAD Model

 

The UWS-5/10-Q48N-C PCB symbol is as follows.

 

 

Figure: UWS-5/10-Q48N-C PCB symbol

 

The UWS-5/10-Q48N-C footprint is as follows.

 

 

Figure: UWS-5/10-Q48N-C Footprint


UWS-5/10-Q48N-C Connection Diagram


The following is the UWS-5/10-Q48N-C Connection Diagram.

 

 

Figure: UWS-5/10-Q48N-C Connection Diagram

 

UWS-5/10-Q48N-C Technical Specifications

 

The UWS-5/10-Q48N-C Technical Specifications are as follows.

 

 

 

Figure: UWS-5/10-Q48N-C Technical Specifications

 

UWS-5/10-Q48N-C Features


• High effi ciency synchronous fl yback topology
• 18-75 Volts DC wide input range with 3.3, 5 and 12 Volts for Output voltage
• Up to 54 Watts total output power with overtemperature shutdown
• Tiny 1.30" x 0.90" x 0.36" open frame package
• Industry standard DOSA "brick" format and pinout
• Extensive self-protection shut down features
• Small footprint DC-DC converter, ideal for high current applications
• 2250 Volt Basic input/output isolation (48V models)
• Operating temperature range -40 to +85°C with derating
• Stable no-load operation with no required external components
• Certifi ed to UL 60950-1, 2nd Edition, EN60950-1 safety approvals


UWS-5/10-Q48N-C Applications


• Renewable energy integration
• Medical devices
• Vehicles
• Smart lighting
• Other small-scale electronic appliances


UWS-5/10-Q48N-C Datasheet


You can download the datasheet from the link given below:


UWS-5/10-Q48N-C


UWS-5/10-Q48N-C Specifications

 

Attribute Value
Output Voltage 5V dc
Input Voltage Range 18 → 75 V dc
Power Rating 50W
Input Voltage Nominal 48 V dc
Output Current 10A
Mounting Type Through Hole
Isolated Yes
Number of Outputs 1
Output Voltage Adjustment Range -20 → +10%
Package 1/16 Brick
Isolation Voltage 2.25kV dc
Depth 9.14mm
Width 22.9mm
Length 33mm
Series UWS
Load Regulation ±0.125%
Maximum Temperature +85°C
Efficiency 91%
Minimum Temperature -40°C


UWS-5/10-Q48N-C Shipping Trays And Boxes & Through-Hole Mount

 

 


UWS-5/10-Q48N-C Manufacturer


The DC DC converter UWS-5/10-Q48N-C manufactured by Murata Power Solutions is available for purchase at the distributor Kynix store. Murata Power Solutions is a subsidiary of Murata Manufacturing Co., Ltd., a global leader in the design, manufacture, and distribution of electronic components and power supply modules. It is situated in Westborough, Massachusetts, USA. Murata Power Solutions also specializes in DC/DC converters, AC/DC power supplies, magnetics, digital panel meters, and data acquisition components.


UWS-5/10-Q48N-C Performance Specification Notes


• All specifi cations are typical unless noted. Ambient temperature = +25°Celsius, VIN is nominal, output current is maximum rated nominal. 
External output capacitance is 1 μF multilayer ceramic paralleled with 10 μF electrolytic. All caps are low ESR. These capacitors are necessary for our test equipment and may not be needed in your application. Testing must be kept short enough that the converter does not appreciably heat up during testing. For extended testing, use plenty of airfl ow. See Derating Curves for temperature performance. All models are stable and regulate within spec without external cacacitance.
• Regulation specifi cations describe the deviation as the input line voltage or output load current is varied from a nominal midpoint value to either extreme (50% load).
• Do not exceed maximum power ratings or output overvoltage when adjusting output trim values.
• All models are fully operational and meet published specifi cations, including “cold start” at –40°C.
• Output Ripple and Noise for the UWS-5/10-Q48 model with a 1uF and  100uF Tantalum Output Capacitor is 65mVp-p (Typical).
• If your dc-dc converter isn't working and you've eliminated the obvious causes (not plugged in, turned off, input fuse blown, etc.), the problem could be input impedance caused by negative resistance. A common solution is to either ac couple or dc block the resistance in the circuit.


UWS-5/10-Q48N-C FAQs


What is the UWS-5/10-Q48N-C in the DC-DC converter?


The Murata Power Solutions Inc. UWS-5/10-Q48N-C, which belongs to the DC-DC Converter category, is available for purchase at the Kynix store. A DC-DC converter is a device that converts one DC voltage to another. The operating voltage of various electronic devices, such as ICs, can vary widely, necessitating the provision of a voltage for each device.


Which is better AC or DC when we talking about the UWS-5/10-Q48N-C?


AC is a type of current that varies in magnitude and polarity (orientation) over time. Direct Current (DC) is characterized by the current that does not change polarity over time. Unstable or incorrect voltage supplies can cause characteristics to degrade and even malfunction. A DC-DC converter is required to convert and stabilize the voltage to prevent this.


What are advantages of using DC-DC Converter UWS-5/10-Q48N-C in automotive?


Depending on the method of conversion, DC-DC converters are also known as linear or switching regulators. An insulated type DC/DC converter that can efficiently convert power from high voltage batteries to low voltage batteries. Because of its small size and low output capacity, it can be used as the primary converter in compact electric mobility devices or as a sub-converter in redundant systems.

 

Related Articles

PL2303 USB to TTL Converter Module Introduction [Video]

Mia 29 Mar 2022 4895

PL2303 UART module integrated with PL2303 IC from Prolific Technology, a single-chip USB to UART bridge IC. This USB-to-UART bridge controller provides a simple solution for updating the RS-232 design...

Continue reading »

SN65HVD251D: CAD Models, Datasheet, Features [FAQ]

Candy 19 Dec 2022 646

CatalogSN65HVD251D Product OverviewSN65HVD251D CAD ModelsSN65HVD251D Pin ConfigurationSN65HVD251D Block DiagramSN65HVD251D LayoutSN65HVD251D FeaturesSN65HVD251D ApplicationsSN65HVD251D Package Outline...

Continue reading »

LM3886T Stereo Class-AB rAudio Amplifiers

Magi 7 Jan 2023 502

LM3886T DescriptionLM3886T FeaturesLM3886T PinoutLM3886T ApplicationsLM3886T CAD ModelsLM3886T Typical ApplicationLM3886T SpecificationsLM3886T ManufacturerLM38...

Continue reading »

General Overview Of Popular IC chip: The Example Of MPXM2053GS

Susie 15 Apr 2023 550

CatalogThe Global Chip Shortage, ExplainedWhat Is The Manufacturing Process Of An IC Chip?How Do You Solder SMD ICs?The Example Of MPXM2053GS In Technology Area.MPXM2053GS DescriptionMPXM2053GS Featur...

Continue reading »

PCA9555PW,118 24-pin CMOS Device: Datasheet, CAD Models and Features

Irene 13 Apr 2022 1032

  Catalog DescriptionCAD ModelsPin ConfigurationBlock DiagramFeatures and BenefitsDatasheetProduct AttributesManufacturerUsing Warning DescriptionThe PCA9555 is a 24-pin CMOS device that provi...

Continue reading »

0 comment

Leave a Reply

Your email address will not be published.

 
 
   
 
Rating:

# 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z