MCIMX287CVM4B: CAD Models, Datasheet, Features

Catalog

MCIMX287CVM4B Product Overview

The MCIMX287CVM4B is an i.MX28 Applications Processors for Consumer Products. The i.MX28 is a general-purpose embedded industrial and consumer market-optimized, high-performance applications processor. The ARM926EJ-STM core from NXP, which operates at speeds of up to 454 MHz, serves as the brain of the i.MX28.

The i.integrated MX28's power management unit (PMU) is made up of numerous linear regulators and a triple output DC-DC switching converter. These include battery charging capabilities for Li-Ion batteries as well as power sequencing for the device and its I/O peripherals, such as memory and SD cards.

In order to eliminate external RAM in applications with tiny footprint RTOS, the i.MX28 processor has an additional 128 Kbyte on-chip SRAM.

The i.MX28 is compatible with SLC and MLC NAND Flash, mobile DDR, DDR2 and LV-DDR2, and DDR2 and LV-DDR2 external memories.

Many external devices, including high-speed USB2.0 OTG, CAN, 10/100 Ethernet, and SD/SDIO/MMC cards, can be attached to the i.MX28.

MCIMX287CVM4B CAD Models

Figure: Footprint

Figure: 3D Models

MCIMX287CVM4B Pin Configuration

Figure: Pin Configuration

MCIMX287CVM4B Block Diagram

Figure: Block Diagram

MCIMX287CVM4B Features

The following lists the features of the i.MX28:

• Five application Universal Asynchronous Receiver-Transmitters (UARTs), up to 3.25 Mbps withhardware flow control
• One debug UART operating at up to 115 Kb/s using programmed I/O
• Two I2C master/slave interfaces, up to 400 kbps

• Four 32-bit timers and a rotary decoder
• Eight Pulse Width Modulators (PWMs)
• Real-time clock (RTC)
• GPIO with interrupt capability
• Power Management Unit (PMU) supports a triple output DC-DC switching converter, multiplelinear regulators, battery charger, and detector.
• 16-channel Low-Resolution A/D Converter (LRADC). There are 16 physical channels but they canonly be mapped to 8 virtual channels at a time.
• Single channel High Speed A/D Converter (HSADC), up to 2 Msps data rate
• 4/5-wire touchscreen controller
• Up to 8X8 keypad matrix with button-detect circuit
• Security features:

— Read-only unique ID for Digital Rights Management (DRM) algorithms

— Secure boot using 128-bit AES hardware decryption

— SHA-1 and SHA256 hashing hardware

— High assurance boot (HAB4)

• Offered in 289-pin Ball Grid Array (BGA)
• ARM926EJ-S CPU running at 454 MHz:

— 16-Kbyte instruction cache and 32-Kbyte data cache

— Arm embedded trace macrocell (CoreSight™ ETM9™)

— Parallel JTAG interface

• 128 KBytes of integrated low-power on-chip SRAM
• 128 KBytes of integrated mask-programmable on-chip ROM
• 1280 bits of on-chip one-time-programmable (OCOTP) ROM
• 16-bit mobile DDR (mDDR) (1.8 V), DDR2 (1.8 V) and LV-DDR2 (1.5 V), up to 205 MHz DDRclock frequency with voltage overdrive
• Support for up to eight NAND Flash memory devices with up to 20-bit BCH ECC
• Four synchronous serial ports (SSP) for SDIO/MMC/MS/SPI: SSP0, SSP1, SSP2, and SSP3. SSP0and SSP1 can support three modes,1-bit, 4-bit, and 8-bit, whereas SSP2 and SSP3 can support only1-bit and 4-bit modes.
• 10/100-Mbps Ethernet MAC compatible with IEEE Std 802.3™:

— Single 10/100 Ethernet with GMII/RMII or Dual 10/100 Ethernet with RMII interface

— Supporting IEEE Std 1588™-compatible hardware timestamp

— Supporting 50-MHz/25-MHz clock output for external Ethernet PHY

• Two 2.0B protocol-compatible Controller Area Network (CAN) interfaces
• One USB2.0 OTG device/host controller and PHY
• One USB2.0 host controller and PHY
• LCD controller, up to 24-bit RGB (DOTCK) modes and 24-bit system-mode
• Pixel-processing pipeline (PXP) supports full path from color-space conversion, scaling,alpha-blending to rotation without intermediate memory access.
• SPDIF transmitter
• Dual serial audio interface (SAIF) to support full-duplex transmit and receive operations; eachSAIF supports three stereo pairs

MCIMX287CVM4B Applications

• Handheld scanners and printers
• Patient-monitoring, portable medical devices
• Smart energy meters, energy gateways
• Media phones, media gateways
• Human-machine interface (HMI) panels:industrial, home
• Industrial drive, PLC, I/O control display, factoryrobotics display, graphical remote controls

MCIMX287CVM4B Package

Figure: Package

MCIMX287CVM4B Datasheet

You can download the datasheet from the link given below:

MCIMX287CVM4B Datasheet

MCIMX287CVM4B Specifications

MCIMX287CVM4B Manufacturer

NXP Semiconductors, which employs 45,000 people across more than 35 nations, is committed to provide secure connectivity solutions for embedded applications. It has been in business for more than 60 years, using its experience and expertise. In order to make people's lives simpler, better, and safer, NXP, a leader in this industry, is promoting innovation in the secure connected car, end-to-end security & privacy, and smart connected solutions markets. Parts from Freescale Semiconductor are now included in the NXP family.

Using Warning

Note: Please check their parameters and pin configuration before replacing them in your circuit.