Ordering & Quality
Photo |
Mfr. Part # |
Company |
Description |
Package |
PDF |
Qty |
Pricing
(USD) |
|
|
LM358PT |
Company:STMicroelectronics |
|
Package:8-TSSOP (0.173"", 4.40mm Width) |
DataSheet |
In Stock:On Order
Buy
|
Price:
1+: |
$0.39000 |
10+: |
$0.31500 |
25+: |
$0.28840 |
100+: |
$0.19460 |
250+: |
$0.16104 |
500+: |
$0.14762 |
1000+: |
$0.11072 |
4000+: |
$0.10401 |
8000+: |
$0.09730 |
12000+: |
$0.08924 |
28000+: |
$0.08589 |
100000+: |
$0.08253 |
200000+: |
$0.08052 |
|
Buy |
|
LM358P Product Description
The LM358B and LM2904B devices are the next-generation versions of the industry-standard operational amplifiers (op amps) LM358 and LM2904, which include two high-voltage (36 V) op amps. These devices provide outstanding value for cost-sensitive applications, with features including low offset (300 µV, typical), common-mode input range to ground, and high differential input voltage capability.
The LM358B and LM2904B op amps simplify circuit design with enhanced features such as unity-gain stability, lower offset voltage of 3 mV (maximum at room temperature), and lower quiescent current of 300 µA per amplifier (typical). High ESD (2 kV, HBM) and integrated EMI and RF filters enable the LM358B and LM2904B devices to be used in the most rugged, environmentally challenging applications.
The LM358B and LM2904B amplifiers are available in micro-sized packaging, such as the SOT23-8, as well as industry standard packages including SOIC, TSSOP, and VSSOP.
LM358P Product Description
Catalog
LM358P Pinout
LM358 Pinout
LM358P CAD Model
LM358 CAD Model
LM358P Product Parameters
Number of channels (#) |
2 |
Total supply voltage (Max) (+5V=5, +/-5V=10)
|
32 |
Total supply voltage (Min) (+5V=5, +/-5V=10)
|
3 |
Rail-to-rail |
In to V-
|
GBW (Typ) (MHz)
|
0.7 |
Slew rate (Typ) (V/us)
|
0.3 |
Vos (offset voltage @ 25 C) (Max) (mV)
|
7 |
Iq per channel (Typ) (mA)
|
0.35 |
Vn at 1 kHz (Typ) (nV/rtHz)
|
40
|
Rating
|
Catalog |
Operating temperature range (C) |
0 to 70 |
Offset drift (Typ) (uV/C)
|
7 |
Features
|
Standard Amps |
Input bias current (Max) (pA) |
150000 |
CMRR (Typ) (dB) |
80 |
Output current (Typ) (mA) |
30 |
Architecture |
Bipolar |
BipolarⅤPackage | Pins | Size
Pin# |
Pin Name |
Pin Description |
1 |
Output A |
Output of IC's First (A) Section or Operational Amplifier 1 |
2 |
Inverting Input A |
Inverting Input of IC's First (A) Section or Operational Amplifier 1 |
3 |
Non Inverting Input A |
Non Inverting Input of IC's First (A) Section or Operational Amplifier 1 |
4 |
Ground (Gnd) |
Ground / Negative For Both Operational Amplifiers |
5 |
Inverting Input B |
Inverting Input of IC's Second (B) Section or Operational Amplifier 2 |
6 |
Non Inverting Input B |
Non Inverting Input of IC's Second (B) Section or Operational Amplifier 2 |
7 |
Output B |
Output of IC's Second (B) Section or Operational Amplifier 2 |
8 |
Vcc |
Positive Supply of Both Sections / Operational Amplifiers of IC. |
LM358P Features
- Wide supply range of 3 V to 36 V (B version)
-
Quiescent current: 300 µA per amplifier (B version, typical)
-
Unity-gain bandwidth of 1.2 MHz (B version)
-
Common-mode input voltage range includes ground, enabling direct sensing near ground
-
Low input offset voltage of 3 mV at 25°C (A and B versions, maximum)
-
Internal RF and EMI filter (B version)
-
On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.
Applications of LM358P
-
Some important Applications of LM358
-
Audio Preamplifiers
-
Small Signal Amplification
-
General op-amp circuits
-
Integrator, Summer, Differentiator, adder, Voltage follower and, etc.
-
Digital multimeters, Oscilloscopes
-
Loop control & regulation
-
Sensor Circuits
-
top steroids
Dark Sensor Circuit
The circuit shown below is a dark sensor circuit built around the LM358 IC. The circuit is almost the same as the above light sensor circuit, but the different is in this circuit the variable resistor middle pin is connected with pin 2 or inverting input of section A of the IC as a result the circuit will now make the output of Section A high when there is complete darkness or low light also depends on the adjustments of the 20K variable resistor.
LM358P in Dark Sensor Circuit
Light Sensor Circuit
The circuit shown below is a light sensor circuit built around the LM358 IC. The IC is used here as a comparator. An LED is connected at the output pin 1 which is the output of the operational amplifier 1 or Section A. The 20K variable resistor is used to adjust the sensitivity of the circuit.
LM358P in Light Sensor Circuit
Using Example
Powerful 12v Audio Amplifier using LM358 IC
LM358P vs LM358PW
Source Content uid |
LM358P |
LM358PW |
Part Life Cycle Code |
Active |
Active |
Ihs Manufacturer |
TEXAS INSTRUMENTS INC |
ROCHESTER ELECTRONICS LLC |
Part Package Code |
DIP |
SOIC |
Package Description |
DIP, DIP8,.3 |
GREEN, PLASTIC, TSSOP-8 |
Pin Count |
8 |
8 |
Reach Compliance Code |
compliant |
unknown |
ECCN Code |
EAR99 |
|
HTS Code |
8542.33.00.01 |
|
Factory Lead Time |
6 Weeks |
|
Date Of Intro |
28070 |
|
Samacsys Description |
LM358P, Dual Operational Amplifier 0.7MHz 5 to 28V, 8-Pin PDIP |
|
Samacsys Manufacturer |
Texas Instruments |
|
Amplifier Type |
OPERATIONAL AMPLIFIER |
OPERATIONAL AMPLIFIER |
Architecture |
VOLTAGE-FEEDBACK |
|
Average Bias Current-Max (IIB) |
0.5 A |
0.5 A |
Bias Current-Max (IIB) @25C |
0.15 A |
|
Common-mode Reject Ratio-Min |
65 dB |
|
Common-mode Reject Ratio-Nom |
80 dB |
80 dB |
Frequency Compensation |
YES |
|
Input Offset Current-Max (IIO) |
0.05 A |
|
Input Offset Voltage-Max |
9000 V |
9000 V |
JESD-30 Code |
R-PDIP-T8 |
R-PDSO-G8 |
JESD-609 Code |
e3 |
e4 |
Length |
9.59 mm |
4.4 mm |
Low-Bias |
NO |
|
Low-Offset |
NO |
|
Micropower |
NO |
|
Number of Functions |
2 |
2 |
Number of Terminals |
8 |
8 |
Operating Temperature-Max |
70 C |
70 C |
Operating Temperature-Min |
|
|
Package Body Material |
PLASTIC/EPOXY |
PLASTIC/EPOXY |
Package Code |
DIP |
TSSOP |
Package Equivalence Code |
DIP8,.3 |
|
Package Shape |
RECTANGULAR |
RECTANGULAR |
Package Style |
IN-LINE |
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
Packing Method |
TUBE |
|
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
260 |
Power |
NO |
|
Power Supplies |
+-1.5/+-15/3/30 V |
|
Programmable Power |
NO |
|
Qualification Status |
Not Qualified |
|
Seated Height-Max |
5.08 mm |
1.2 mm |
Slew Rate-Nom |
0.3 V/us |
0.3 V/us |
Supply Current-Max |
1.2 mA |
|
Supply Voltage Limit-Max |
32 V |
32 V |
Supply Voltage-Nom (Vsup) |
5 V |
5 V |
Surface Mount |
NO |
YES |
Technology |
BIPOLAR |
BIPOLAR |
Temperature Grade |
COMMERCIAL |
COMMERCIAL |
Terminal Finish |
Matte Tin (Sn) |
NICKEL PALLADIUM GOLD |
Terminal Form |
THROUGH-HOLE |
GULL WING |
Terminal Pitch |
2.54 mm |
0.65 mm |
Terminal Position |
DUAL |
DUAL |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
NOT SPECIFIED |
Unity Gain BW-Nom |
700 kHz |
700 kHz |
Voltage Gain-Min |
15000 |
|
Wideband |
NO |
|
Width |
7.62 mm |
3 mm |
Base Number Matches |
18 |
3 |
Moisture Sensitivity Level |
|
1 |
Using Warnings
Note: Please check their parameters and pin configuration before replacing them in your circuit.
Component Datasheet
LMP38P Datasheet
FAQ
Which is lm358p datasheet has two op amps?
LM358P Datasheet – Dual Operational Amplifier 1 Two internally compensated op amps 2 Eliminates need for dual supplies 3 Allows direct sensing near GND and VOUT also goes to GND 4 Compatible with all forms of logic 5 Power drain suitable for battery operation 6 Pin-out same as LM1558/LM1458 dual op amp.
What kind of amplifier is the lm532?
The LM532 / LM358 / LM2904 consists of two independent, high gain, internally frequency-compensated operational amplifiers internally frequency-compensated operational amplifiers designed specifically to operate from a single power supply over a wide range of voltages.
What are the applications of Texas Instruments lm358p Mouser?
High ESD (2kV, HBM) and integrated EMI and RF filters enable the LMx58x/LM2904x/LM2904x-Q1 to be used in the most rugged, environmentally challenging applications. The LM2904x-Q1 devices are AEC-Q100 qualified for automotive applications.