Product Overview
The AR8035 is part of the Arctic family of devices - which includes the AR8031, AR8033, and the AR8035. It is Atheros’4th generation, single port 10/100/1000 Mbps Tri-speed Ethernet PHY. It supports RGMII interface to the MAC.
This blog will introduce AR8035-AL1B systematically from its features, pinout to its specifications, applications, also including AR8035-AL1B datasheet and so much more.
Catalog
AR8035-AL1B Features
- 10BASE-Te/100BASE-Tx/1000 BASE-TIEEE 802.3 compliant
- Supports 1000 BASE-T PCS and autonegotiation with next page support
- Supports RGMII interface to MAC deviceswith a broad I/O voltage level options including 2.5V, 1.8V and 1.5V, and is compatible with 3.3V I/O
- RGMII timing modes support internal delayand external delay on Rx path
- Error-free operation up to 140 meters ofCAT5 cable
- Supports Atheros latest Green Ethos®power saving modes with internal automatic DSP power saving scheme
- Supports 802.3az (Energy Efficient Ethernet)
- Fully integrated digital adaptive equalizers,echo cancellers, and near end crosstalk (NEXT) cancellers
- Supports Wake-on-LAN (WoL) to detectmagic packet and notify the sleeping system to wake up
- A robust Cable Discharge Event (CDE)tolerence of ± 6kV
- A robust surge protection with ±750V/differential mode and ±4KV/common mode
- Jumbo Frame support up to 10KB (fullduplex)
- All digital baseline wander correction
- Automatic channel swap (ACS)
- Automatic MDI/MDIX crossover
- Automatic polarity correction
- IEEE 802.3u compliant Auto-Negotiation
- Software programmable LED modes
- Multiple Loopback modes for diagnostics
- Cable Diagnostic Test (CDT)
- Single power supply: 3.3V
- 5mm x 5mm. 40-pin QFN package
AR8035-AL1B Pinout
The following figure is the diagram of AR8035-AL1B pinout.
AR8035-AL1B Pinout
AR8035-AL1B CAD Models
The following are AR8035-AL1B Symbol, Footprint, and 3D Model.
AR8035-AL1B Symbol
AR8035-AL1B Footprint
AR8035-AL1B 3D Model
AR8035-AL1B Circuit Diagram
The following are the circuit diagrams of AR8035-AL1B.
Reference Design Schematic —Active Low
Reference Design Schematic —Active High
AR8035-AL1B Block Diagram
The following figure shows the block diagram of AR8035-AL1B
AR8035-AL1B Block Diagram
AR8035-AL1B Package
The following diagram shows the AR8035-AL1B package.
AR8035-AL1B Package
AR8035-AL1B Specification
Parameter |
Content |
Number of Channels per Chip |
1 |
Maximum Data Rate |
1Gbps |
PHY Line Side Interface |
Yes |
JTAG Support |
No |
Minimum Operating Supply Voltage (V) |
3.15 |
Typical Operating Supply Voltage (V) |
3.3 |
Maximum Operating Supply Voltage (V) |
3.45 |
Power Supply Type |
Analog| Digital |
Minimum Operating Temperature (°C) |
-40 |
Maximum Operating Temperature (°C) |
85 |
AR8035-AL1B Manufacturer
Qualcomm is an innovative leader known for making bold moves in mobile technology, and they continually strive to transform the wireless space. Their advanced systems-on-chips, modems, and chipsets enhance the devices and applications we use every day in the realms of Internet of Things, networking, and healthcare, to name just a few.
AR8035-AL1B Datasheet
You can download AR8035-AL1B datasheet from the link given below:
AR8035-AL1B Datasheet
Using Warnings
Note: Please check their parameters and pin configuration before replacing them in your circuit.
AR8035-AL1B FAQ
What is an Ethernet transceiver?
Ethernet transceivers are used to link electronic devices in Ethernet circuitry. They are also known as media access units. Wireless transceivers combine technology in Ethernet and RF transponders to improve Wi-Fi transmission speed.
What are transceivers used for?
The transceiver is an important part of a fiber optics network and is used to convert electrical signals to optical (light) signals and optical signals to electrical signals. It can be plugged into or embedded into another device within a data network that can send and receive a signal.
What is the difference between a transponder and transceiver?
Generally speaking, a transceiver is a device that can both transmit and receive signals, whereas the transponder is a component with a processor programmed to monitor incoming signals and with a preprogrammed reply in the fiber optic communication network.