Product Overview
Kynix Part #: | KY32-MPC8377VRAJFA |
Manufacturer Part#: | MPC8377VRAJFA |
Product Category: | Embedded - Microprocessors |
Stock: | Yes |
Manufacturer: | Freescale Semiconductor - NXP |
Click Purchase button to buy original genuine MPC8377VRAJFA |
|
Description: | IC MPU MPC83XX 533MHZ 689TEPBGA |
Datasheet: | MPC8377VRAJFA Datasheet |
Package: | 689-BBGA Exposed Pad |
Quantity: | 572 PCS |
MPC8377VRAJFA Images are for reference only:
CAD Models
There is no relevant information available for this part yet.
Product Attributes
Manufacturer: | Freescale Semiconductor - NXP |
Product Category: | Embedded - Microprocessors |
Status: | Active |
Series: | MPC83xx |
Bit Size: | 32 |
Core Processor: | PowerPC e300c4s |
Co-Processors/DSP: | - |
Device Core: | PowerQUICC II Pro |
Data Bus Width: | 32 bit |
Display & Interface Controllers | - |
Ethernet: | 10/100/1000Mbps (2) |
EU RoHS Compliant: | Yes |
Frequency: | 533 MHz |
Graphics Acceleration: | No |
Interface: | SPI |
Interface Type: | Ethernet, I2C, PCIe, SPI, UART, USB |
Instruction Type: | Floating Point |
Instruction Set Architecture: | RISC |
JESD-30 Code: | S-PBGA-B689 |
JESD-609 Code: | e2 |
Lead Finish: | Tin/Silver |
Memory Size: | 32 kB |
Memory Type: | L1 Cache |
Mounting-Style: | SMD/SMT |
Maximum Clock Frequency: | 533 MHz |
Number of Pins: | 689 |
Number of Timers: | 2 |
Number of Terminals: | 689 |
Number of CPU Cores: | 1 |
Operating Temperature-Min: | 0.0°C |
Operating Temperature-Max: | 125°C |
Pin Count: | 689 |
Power Supplies: | 1,1.8/2.5,2.5/3.3 |
Package/Case: | 689-BBGA Exposed Pad |
Package Shape: | SQUARE |
Package Code: | BGA |
Package Body Material: | PLASTIC/EPOXY |
Package Equivalence Code: | BGA689,29X29,40 |
Peak Reflow Temperature: | 260 °C |
RAM Size: | 32 kB |
RAM Controllers: | DDR, DDR2 |
REACH Compliant: | Yes |
SATA: | SATA 3Gbps (2) |
Speed: | 533.0 MHz |
Sub Category: | Microprocessors |
Surface Mount: | Yes |
Security Features: | - |
Supplier Device Package: | 689-TEPBGA II (31x31) |
Tradename: | PowerQUICC |
Technology: | CMOS |
Terminal Form: | BALL |
Terminal Pitch: | 1.0 mm |
Terminal Finish: | Tin/Silver (Sn/Ag) |
Terminal Position: | BOTTOM |
Time@Peak Reflow Temperature-Max: | 40 s |
USB: | USB 2.0 + PHY (1) |
Unit Weight: | 0.167308 oz |
Product Features
• e300c4s core built on Power Architecture® technology with 32 KB instruction cache and 32 KB data cache, a floating point unit, and two integer units
• DDR1/DDR2 memory controller supporting a 32/64-bit interface
• Peripheral interfaces, such as a 32-bit PCI interface with up to 66-MHz operation
• 32-bit local bus interface running up to 133-MHz
• USB 2.0 (full/high speed) support
• Power management controller for low-power consumption
• High degree of software compatibility with previous-generation PowerQUICC processor-based designs for backward compatibility and easier software migration
• Optional security engine provides acceleration for control and data plane security protocols
• Single 32- or 64-bit interface supporting both DDR1 and DDR2 SDRAM
• Support for up to 400-MHz data rate
• Support up to 4 chip selects
• 64-Mbit to 2-Gbit (for DDR1) and to 4-Gbit (for DDR2) devices with ×8/×16/×32 data ports (no direct ×4 support)
• Support for up to 32 simultaneous open pages
• Supports auto refresh
• On-the-fly power management using CKE
• 1.8-/2.5-V SSTL2 compatible I/O
• Supports USB on-the-go mode, including both device and host functionality, when using an external ULPI (UTMI + low-pin interface) PHY
• Complies with USB Specification, Rev. 2.0
• Supports operation as a stand-alone USB device
— Supports one upstream facing port
— Supports three programmable USB endpoints
• Supports operation as a stand-alone USB host controller
— Supports USB root hub with one downstream-facing port
— Enhanced host controller interface (EHCI) compatible
• Supports high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) operation; low-speed operation is supported only in host mode
• Supports UTMI + low pin interface (ULPI)
• Two enhanced Ethernet interfaces can be used for RGMII/MII/RMII/RTBI
• Two controllers conform to IEEE Std 802.3®, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z, IEEE 802.3au, IEEE 802.3ab, and IEEE Std 1588™ standards
• Support for Wake-on-Magic Packet™, a method to bring the device from standby to full operating mode
• MII management interface for external PHY control and status
• Provides power management when the device is used in both host and agent modes
• Supports PCI Power Management 1.2 D0, D1, D2, and D3hot states
• Support for PME generation in PCI agent mode, PME detection in PCI host mode
• Supports Wake-on-LAN (Magic Packet), USB, GPIO, and PCI (PME input as host)
• Supports MPC8349E backward-compatibility mode
• Allows chaining (both extended and direct) through local memory-mapped chain descriptors (accessible by local masters)
• Supports misaligned transfers
• Data encryption standard execution unit (DEU), supporting DES and 3DES
• Advanced encryption standard unit (AESU), supporting AES
• Message digest execution unit (MDEU), supporting MD5, SHA1, SHA-256, and HMAC with any algorithm
• One crypto-channel supporting multi-command descriptor chains
• PCI Specification Revision 2.3 compatible
• Single 32-bit data PCI interface operates at up to 66 MHz
• PCI 3.3-V compatible (not 5-V compatible)
• Support for host and agent modes
• On-chip arbitration, supporting 5 external masters on PCI
• Selectable hardware-enforced coherency
• PCI Express 1.0a compatible
• Two ×1 links or one ×2 link width
• Auto-detection of number of connected lanes
• Selectable operation as root complex or endpoint
• Both 32- and 64-bit addressing
• 128-byte maximum payload size
• Support for MSI and INTx interrupt messages
• Virtual channel 0 only
• Selectable Traffic Class
• Full 64-bit decode with 32-bit wide windows
• Dedicated four channel descriptor-based DMA engine per interface
• Supports Serial ATA Rev 2.5 Specification
• Spread spectrum clocking on receive
• Asynchronous notification
• Hot Plug including asynchronous signal recovery
• Link power management
• Native command queuing
• Staggered spin-up and port multiplier support
• Port multiplier support
• SATA 1.5 and 3.0 Gb/s operation
• Interrupt driven
• Power management support
• Error handling and diagnostic features
— Far end/near end loopback
— Failed CRC error reporting
— Increased ALIGN insertion rates
• Scrambling and CONT override
• Conforms to SD Host Controller Standard Specification, Rev 2.0 with Test Event register support.
• Compatible with the MMC System Specification, Rev 4.0
• Compatible with the SD Memory Card Specification, Rev 2.0, and supports High Capacity SD memory cards
• Compatible with the SDIO Card Specification Rev, 1.2
• Designed to work with SD Memory, miniSD Memory, SDIO, miniSDIO, SD Combo, MMC, MMCplus, MMC 4x, and RS-MMC cards
• SD bus clock frequency up to 50 MHz
• Supports 1-/4-bit SD and SDIO modes, 1-/4-bit MMC modes
• Supports internal DMA capabilities
Applications
There is no relevant information available for this part yet.
Advantages and Disadvantages
There is no relevant information available for this part yet.
ECCN / UNSPSC
ECCN | 3A991.A.2 |
HTSN: | 8542310001 |
SCHEDULE B: | 8542310000 |
Environmental & Export Classifications
Moisture Sensitivity Level (MSL) | 3(168 Hours) |
Lead Free Status / RoHS Status | Lead free / RoHS Compliant |
Product Compliance
USHTS: | 8542310001 |
CAHTS: | 8542310012 |
CNHTS: | 8542319000 |
JPHTS: | 8542310313 |
KRHTS: | 8542311000 |
MXHTS: | 85423102 |
TARIC: | 8542319000 |
Halogen Free: | Halogen Free |
Documents & Media
Product Manufacturer
NXP Semiconductor enables secure connections and infrastructure for a smarter world, advancing solutions that make lives easier, better and safer. As the world leader in secure connectivity solutions for embedded applications, NXP is driving innovation in the secure connected vehicle, end-to-end security & privacy and smart connected solutions markets. Built on more than 60 years of combined experience and expertise, the company has 45,000 employees in more than 35 countries.
Product Range
ARM ® PROCESSORS | ANALOG | POWER ARCHITECTURE ®PROCESSORS |
MEDIA AND AUDIO | RF | IDENTIFICATION & SECURITY |
Sensors | Wireless | Automotive Products |
Distributors
Distributors | Stock | Manufacturers | Descriptions |
Kynix | 572 | Freescale Semiconductor - NXP | IC MPU MPC83XX 533MHZ 689TEPBGA |
DigiKey | 0 | NXP USA Inc. | IC MPU MPC83XX 533MHZ 689TEBGA |
Mouser | 0 | NXP Semiconductors | Microprocessors - MPU 8377 PBGA ST PbFr No ENC |
Alternative Models
There is no relevant information available for this part yet.
Popularity by Region
There is no relevant information available for this part yet.
Market Price Analysis
There is no relevant information available for this part yet.
You May Also Be Interested In:
Part Number | Manufacturer | Package | Quantity | Description |
P1013NSN2EFB | Freescale Semiconductor - NXP | 689-BBGA Exposed Pad | 73 PCS | IC MPU Q OR IQ 1.055GHZ 689TBGA |
MPX5010DP | FREESCALE | SIP-6 | 568 PCS | SENSOR DIFF PRESS 1.45 PSI MAX |
MC908AZ60ACFUE | FREESCALE | QFP | 2960 PCS | IC MCU 8BIT 60KB FLASH 64QFP |
MCF52110CEP66 | Freescale Semiconductor - NXP | 64-VFQFN Exposed Pad | 1128 PCS | IC MCU 32BIT 128KB FLASH 64QFN |
MPC8358EVRAGDGA | Freescale Semiconductor - NXP | 668-BBGA Exposed Pad | 102 PCS | IC MPU MPC83XX 400MHZ 668BGA |
ADSP-2101KP-100 | Analog Devices, Inc. | PLCC68 | 830 PCS | - |
Best Sales of diode
Photo |
Part |
Company |
Description |
Pricing (USD) |
|
Alternative Models
Part |
Compare |
Manufacturers |
Category |
Description |
|
Ordering & Quality
Image |
Mfr. Part # |
Company |
Description |
Package |
PDF |
Qty |
Pricing (USD) |
|