Oct 10 2020
IntroductionRLC circuit is a circuit structure composed of resistance (R), inductance (L), and capacitance (C). The LC circuit is a simple example. RLC circuits are also called second-order circuits. The voltage or current in the circuit is the solution of a second-order differential equation, and i
Sep 17 2020
IntroductionA band pass filter is an electronic device or circuit that allows signals between two specific frequencies to pass. That is, allowing signals in a specific frequency band to pass while shielding other frequency bands. In other words, a band-pass filter attenuates frequency components in
Sep 11 2020
IntroductionLED lights cannot directly use the conventional mains grid voltage, because of the characteristics of LED lighting. In order to meet the special voltage and current requirements of LEDs, a specially designed voltage conversion device must be used to make LEDs work normally. This device i
Sep 10 2020
Introduction Many people who are often engaged in maintenance work have experienced electrical shocks after being turned off. Obviously, the "culprit" causing this phenomenon is the capacitor. From power capacitors to filter capacitors to the graphite coating of old-fashioned televisions' picture
Sep 3 2020
IntroductionThe hard disk interface is the connecting part between the hard disk and the host computer system, and its function is to transmit data between the hard disk cache and the host memory. Different hard disk interfaces determine the data transmission speed between the hard disk and the comp
Aug 31 2020
IntroductionResistors are usually connected in a circuit in various ways, and the two most basic ways are series and parallel. This article will mainly introduce these two connection methods, including their definitions, formulas, circuit diagrams, examples and identification methods. In addition, t
Aug 18 2020
IntroductionIn electronics, operational amplifiers are generally dual/quadruple configurations. So users can consider using the extra amplifier as a comparator. Electrical symbols of the comparator and the operational amplifier are very similar. They are devices with one input inverting terminal and
Aug 12 2020
IntroductionThe relay is an electrical device regarded as a switch in the circuit. That is, the current in the control circuit depends on the "open" and "close" of relay contacts. Therefore, the reliability and service life of the relay depend on the quality and performance of the contacts
Aug 7 2020
Introduction Capacitors are components that store electricity and electrical energy (potential energy), and play an important role in circuits such as tuning, bypassing, coupling, and filtering. Capacitors are connected in parallel to increase capacity, and capacitors are connected in series to dec
Aug 5 2020
IntroductionA relay is an electromagnetic switch operated by a relatively small electric current that can turn on or off a much larger electric current. It consists of a set of input terminals for a single or multiple control signals, and a set of operating contact terminals. Because of unique chara
As one of the most favorite blogs by electronic engineers,Apogeeweb provides the latest information of the semiconductor industry for you,as well as the related information in the electronics industry,the electronic professional terms and daily recommended electronic component headlines.
Recent Comments