Product Overview
Kynix Part #: | KY32-MCF51CN128CGT |
Manufacturer Part#: | MCF51CN128CGT |
Product Category: | Embedded - Microcontrollers |
Stock: | Yes |
Manufacturer: | Freescale Semiconductor - NXP |
Click Purchase button to buy original genuine MCF51CN128CGT | |
Description: | IC MCU 32BIT 128KB FLASH 48QFN |
Datasheet: | MCF51CN128CGT Datasheet |
Package: | 48-VFQFN Exposed Pad |
Quantity: | 509 PCS |
MCF51CN128CGT Images are for reference only.
CAD Models
MCF51CN128CGT Symbol
MCF51CN128CGT Footprint
Product Attributes
Categories | Integrated Circuits (ICs) Embedded - Microcontrollers |
Manufacturer | NXP USA Inc. |
Series | MCF51CN |
Packaging | Tray |
Part Status | Active |
Core Processor | Coldfire V1 |
Core Size | 32-Bit |
Speed | 50MHz |
Connectivity | Ethernet, I²C, SCI, SPI |
Peripherals | LVD, PWM, WDT |
Number of I/O | 38 |
Program Memory Size | 128KB (128K x 8) |
Program Memory Type | FLASH |
EEPROM Size | - |
RAM Size | 24K x 8 |
Voltage - Supply (Vcc/Vdd) | 1.8V ~ 3.6V |
Data Converters | A/D 12x12b |
Oscillator Type | External |
Operating Temperature | -40°C ~ 85°C (TA) |
Mounting Type | Surface Mount |
Package / Case | 48-VFQFN Exposed Pad |
Supplier Device Package | 48-QFN-EP (7x7) |
Base Part Number | MCF51CN128 |
Mfr Package Description | 7 X 7 MM, 1 MM HEIGHT, 0.50 MM PITCH, MO-220VKKD-2, QFN-48 |
EU RoHS Compliant | Yes |
China RoHS Compliant | Yes |
Status | Transferred |
ADC Channels | YES |
Address Bus Width | 0.0 |
Bit Size | 32 |
Clock Frequency-Max | 25.0 MHz |
CPU Family | COLDFIRE |
DAC Channels | NO |
DMA Channels | YES |
External Data Bus Width | 0.0 |
JESD-30 Code | S-XQCC-N48 |
Moisture Sensitivity Level | 3 |
Number of I/O Lines | 38.0 |
Number of Terminals | 48 |
Operating Temperature-Min | -40.0 Cel |
Operating Temperature-Max | 85.0 Cel |
Package Body Material | UNSPECIFIED |
Package Code | HVQCCN |
Package Equivalence Code | LCC48,.27SQ,20 |
Package Shape | SQUARE |
Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
Peak Reflow Temperature (Cel) | 260 |
Power Supplies | 1.8/3.6 |
PWM Channels | YES |
Qualification Status | Not Qualified |
RAM (bytes) | 24576.0 |
ROM Programmability | FLASH |
ROM (words) | 131072 |
Seated Height-Max | 1.0 mm |
Speed | 50.33 MHz |
Sub Category | Microcontrollers |
Supply Voltage-Nom | 2.7 V |
Supply Voltage-Min | 1.8 V |
Supply Voltage-Max | 3.6 V |
Surface Mount | YES |
Technology | CMOS |
Temperature Grade | INDUSTRIAL |
Terminal Form | NO LEAD |
Terminal Pitch | 0.5 mm |
Terminal Position | QUAD |
Time@Peak Reflow Temperature-Max (s) | 40 |
Length | 7.0 mm |
Width | 7.0 mm |
Features
• 32-bit ColdFire V1 Central Processing Unit (CPU)
– Up to 50.33 MHz ColdFire CPU from 3.6 V to 3.0 V, up to 40 MHz CPU from 3.0 V to 2.1 V, and up to 20 MHz CPU from 2.1 V to 1.8 V across temperature range of –40 °C to 85 °C
– Provides 0.94 Dhrystone 2.1 MIPS per MHz performance when running from internal RAM (0.76 DMIPS/MHz from flash)
– ColdFire Instruction Set Revision C (ISA_C)
– Support for up to 45 peripheral interrupt requests and 7 software interrupts
• On-Chip Memory
– 128 KB Flash, 24 KB RAM
– Flash read/program/erase over full operating voltage and temperature
– On-chip memory aliased to create a contiguous memory space with off-chip memory
– Security circuitry to prevent unauthorized access to Peripherals, RAM, and flash contents
• Ethernet
– FEC—10/100 BASE-T/TX, bus-mastering fast ethernet controller with direct memory access (DMA); supports half or full duplex; operation is limited to 3.0 V to 3.6 V
– MII—media independent interface to connect ethernet controller to external PHY; includes output clock for external PHY
• External Bus
– Mini-FlexBus—Multi-function external bus interface; supports up to 1 MB memories, gate-array logic, simple slave device or glueless interfaces to standard chip-selected asynchronous memories
– Programmable options: access time per chip select, burst and burst-inhibited transfers per chip select, transfer direction, and address setup and hold times
• Power-Saving Modes
– Two low-power stop modes, one of which allows limited use of some peripherals (ADC, KBI, RTC)
– Reduced-power wait mode shuts off CPU and allows full use of all peripherals; FEC can remain active and conduct DMA transfers to RAM and assert an interrupt to wake up the CPU upon completion
– Low-power run and wait modes allow peripherals to run while the voltage regulator is in standby
– Peripheral clock enable register can disable clocks to unused modules, thereby reducing currents
– Low-power external oscillator that can be used in stop3 mode to provide accurate clock source to active peripherals
– Low-power real-time counter for use in run, wait, and stop modes with internal and external clock sources
– 6 μs typical wake-up time from stop3 mode
– Pins and clocks to peripherals not available in smaller packages are automatically disabled for reduced current consumption; no user interaction is needed
• Clock Source Options
– Oscillator (XOSC) — Loop-control pierce oscillator; crystal or ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz to 25 MHz
– Multi-Purpose Clock Generator (MCG) — Flexible clock source module with either frequency-locked-loop (FLL) or phase-lock loop (PLL) clock options. FLL can be controlled by internal or external reference and includes precision trimming of internal reference, allowing 0.2% resolution and 2% deviation over temperature and voltage. PLL derives a higher accuracy clock source derived by an external reference
• System Protection
– Watchdog computer operating properly (COP) reset with option to run from dedicated 1-kHz internal clock source or bus clock
– Low-voltage detection with reset or interrupt; selectable trip points
– Illegal opcode and illegal address detection with programmable reset or exception response
– Flash block protection
• Development Support
– Single-wire background debug module (BDM) interface; supports same electrical interface used by the S08, 9S12, and 9S12x families debug modules
– 4 PC plus 2 address (optional data) breakpoint registers with programmable 1- or 2-level trigger response
– 64-entry processor status and debug data trace buffer with programmable start/stop conditions
• Peripherals
– ADC—Up to 12 channel, 12-bit resolution; 2.5 μs conversion time; automatic compare function; 1.7 mV/°C temperature sensor; internal bandgap reference channel; operation in stop3; fully functional from 3.6 V to 1.8 V
– SCI—Three modules with optional 13-bit break
– SPI—Two interfaces with full-duplex or single-wire bi-directional; double-buffered transmit and receive; master or slave mode; MSB-first or LSB-first shifting
– IIC—Two IICs with up to 100 kbps with maxmimum bus loading; multi-master operation; programmable slave address; interrupt-driven byte-by-byte data transfer; supports broadcast mode and 11-bit addressing
– TPM—Two 3-channel, 16-bit resolution modules; selectable input capture, output compare, or buffered edge- or center-aligned PWM on each channel
– RTC—8-bit modulus counter with binary- or decimal-based prescaler; external clock source for precise time base, time-of-day, calendar- or task-scheduling functions; free-running on-chip low-power oscillator (1 kHz) for cyclic wake-up without external components; runs in all MCU modes
– MTIM—Two 8-bit resolution modulo timers with 8-bit prescaler
• Input/Output
– Up to 70 general-purpose input/output (GPIO) pins, all with pin mux controls to select alternate functions
– 16 keyboard interrupt (KBI) pins with selectable polarity
– Hysteresis and configurable pull-up device or input filtering on all input pins; configurable slew rate and drive strength on all output pins
– 16 Rapid GPIO pins connected to the CPU’s high-speed local bus with set, clear, and toggle functionality (PTD and PTF)
Advantages and Disadvantages
There is no relevant information available for this part yet.
Applications
There is no relevant information available for this part yet.
Product Functions
There is no relevant information available for this part yet.
ECCN / UNSPSC
Description | Value |
ECCN | 5A992 |
HTSN | 8542310001 |
SCHEDULE B | 8542310000 |
Environmental & Export Classifications
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Lead Free Status / RoHS Status | Lead free / ROHS3 Compliant |
Documents & Media
Product Manufacturer
NXP Semiconductors N.V. is a Dutch global Semiconductor manufacturer headquartered in Eindhoven, Netherlands. The company employs approximately 31,000 prople in more than 35 countries, including 11,200 engineers in 33 counties. NXP Semiconductors N.V. enables secure connections and infrastructure for a smarter world, advancing solutions that make lives easier, better, and safer. As the world leader in secure connectivity solutions for embedded applications, NXP is driving innovation in the secure connected vehicle, end-to-end security, and privacy and smart connected solutions markets.
Product Range
Devices | Boards | Developer Tools |
ARM ® PROCESSORS | AUTOMOTIVE PRODUCTS | IDENTIFICATION & SECURITY |
Kinetis Cortex®-M Microcontrollers | In-Vehicle Network | NFC |
LPC Cortex-M Microcontrollers | Microcontrollers and Processors | RFID |
Distributors
Distributor | Stock | Manufacturer | Descriptions |
Kynix | 509 PCS | Freescale Semiconductor - NXP | IC MCU 32BIT 128KB FLASH 48QFN |
Digi-Key | 1300 PCS | NXP USA Inc. | IC MCU 32BIT 128KB FLASH 48QFN |
Avnet | Non-stock | NXP | MCU 32-bit MCF51CN ColdFire RISC 128KB Flash 2.5V/3.3V 48-Pin QFN EP Tray |
Mouser | 1068 PCS | NXP Semiconductors | 32-bit Microcontrollers - MCU 32-Bit 128K Flash w/ On-Chip Ethernet |
Alternative Models
There is no relevant information available for this part yet.
Popularity by Region
MCF51CN128CGT Popularity by Region
Market Price Analysis
MCF51CN128CGT Market Price Analysis
You May Also Be Interested In
Best Sales of diode
Photo |
Part |
Company |
Description |
Pricing (USD) |
|
Alternative Models
Part |
Compare |
Manufacturers |
Category |
Description |
|
Ordering & Quality
Image |
Mfr. Part # |
Company |
Description |
Package |
PDF |
Qty |
Pricing (USD) |
|